Samsung 755DFG manual Signal cable, Stereo cable, DC input cable, On the back of your monitor

Your New Monitor

Connecting Your Monitor & Speakers

Caution : Turn the power off to the monitor, computer and speakers before connecting or disconnecting the speakers.

1	Signal cable
	Connect the end of the signal cable to
	your computer’s video port. If you are
	using a Macintosh computer, connect
	the cable to a Macintosh adapter, and
	set the pins on your adapter (adapter
	not included). A PC-compatible
	computer does not need an adapter.

2	Stereo cable
	Connect the stereo cable to the audio
	out port on the back of your monitor.
3	DC input cable
	Connect this cable to DC output port
	on the back of your monitor.
4	Left output cable
	Connect this cable to L- input port on
	the back of the left side speaker.
5	L-input port
	Connect the left output cable from

right speaker here.

6	Power port
	Connect the power cord for your
	monitor to the power port on the back
	of the monitor.

7	DC output port
	Connect DC input cable here.
8	Power cords
	Plug the power cord for the monitor
	and the power cord for your computer
	into a nearby outlet.
9	Stereo- Stereo cable
	Connect the stereo-stereo cable to

the sound card on the your computer.

10 Turn on your computer and monitor. If your monitor displays an image, installation is complete.

11 Install the monitor driver

∙Insert the provided diskette into the A drive.

∙Double click the “install.exe” file.

English 5