Samsung 714BM manual Do not use a damaged or loose plug

Page 3

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Do not disconnect the power cord while using the monitor.

zA surge may be caused by the separation and may damage the monitor.

Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry cloth.

zUsing the power cord with a dusty plug or connector may cause electric shock or fire.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

Image 3
Contents SyncMaster 714BM Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugInstallation Do not drop the monitor when moving itDo not place the product on the floor Do not place the monitor face down CleanKeep any heating devices away from the power cable Put down the monitor carefullyOthers Do not spray water or detergent directly onto the monitorDo not remove the cover or back Do not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Try to maintain a good posture when using the monitor Good Postures When Using the MonitorUnpacking Front MagicRotation softwareMenu button MagicBright button Rear RGB in port Power on/off SwitchFor using a locking device, contact where you purchased it DVI in portConnecting the Monitor RGBDVI Using the Stand Has StandAttaching a Base Click Windows Installing the Monitor Driver AutomaticMicrosoft Windows Vista Operating System Installing the Monitor Driver ManualPage Page Microsoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Natural Color Natural ColorMicrosoft Windows NT Operating System Linux Operating SystemInstalling the Natural Color Software Auto Auto OSD Lock & UnlockLocked When pressing the Menu button after locking the OSDMagicBright VolumeVolume MagicBrightSource PictureColor Brightness ContrastMagicColor Color Tone Image Color Control GammaCoarse Fine OSD Sharpness PositionLanguage Position Transparency Display Time SetupAuto Source Image Reset Color Reset InformationInformation Installation Page Installation Uninstall When connecting D-Sub cable Symptom Check ListSignal Cable on SolutionsScreen Is the screen displaying Shows strange Control Panel → Display → SettingsSelf-Test Feature Check QuestionAnswer Useful Tips General PowerSaver Vertical Frequency Preset Timing ModesPreset Timing Modes Horizontal FrequencyEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISTerms For Better DisplayMiddle East & Africa Authority Suggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode