Rear

Enter button [] / SOURCE button

Activates a highlighted menu item. /

Push the 'SOURCE', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- analog or digital input signal.)

If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.

AUTO button	Use this button for auto adjustment.
	>> Click here to see an animation clip
Power button [ ]	Use this button for turning the monitor on and off.
Power indicator	This light glows blue during normal operation, and blinks blue once as
	the monitor saves your adjustments.
Anion Generation Port	This is an anion emission port.
	When the monitor is operated normally and the anoin is 'On', blue
	light will glow.
	Anion Ventilator Cleaning
	(It is recommended that a regular cleaning is performed once a
	month.)

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

The configuration at the back of the monitor may vary from product to product.

POWER port	Connect the power cord for your monitor to the power port on the back of the
	monitor.
DVI IN port	Connect the DVI Cable to the DVI port on the back of your monitor.
RGB IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.
Kensington Lock	The Kensington lock is a device used to physically fix the system to
	something when using it in a public place.
	The locking device has to be purchased separately.
	For using a locking device, contact the place of purchase.

See Connecting Cables for further information regarding cable connections.

>> Click here to see an animation clip

Rear