Samsung 580STFT, 570STFT manual Appendix, PowerSaver

4_E570S580Sbody.fm Page 19 Monday, July 16, 2001 2:53 PM

Appendix

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”.

PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See Table 4 below for details.

Table 4. Power-saving modes

			Power-Saving Function mode
State	Normal		(EPA/NUTEK/ENERGY 2000)
	Operation	Standby Mode		Sleep Mode	Deep Sleep Mode
				Position A1	Position A2
Horizontal Sync	Active	Inactive		Active	Inactive
Vertical Sync	Active	Active		Inactive	Inactive
Video	Active	Blanked		Blanked	Blanked
Power	Green	Amber		Amber Blinking	Amber Blinking
Indicator				(0.5 sec interval)	(1 sec interval)
Power	25W (Nom.)	Less than 3W		Less than 3W	Less than 3W
Consumption

NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return. This occurs when you move the computer’s mouse or press a key on the keyboard.

This monitor is EPA ENERGY STAR ® compliant and NUTEK/ENERGY 2000 compliant when used with a computer equipped with VESA DPMS functionality.

For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

19

English