Connecting a Camcorder

Connections

Note

•Select Component for the connection to a DVD player using the SOURCE button on the front of the LCD Display or on the remote control.

•Then, start the DVD Player with a DVD disc inserted.

•A component cable is optional.

•For an explanation of Component video, consult your DVD manual.

Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the AV AUDIO IN [L-AUDIO-R] on the LCD Display.

Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN [VIDEO] on the LCD Display.

Note

•Select AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on the remote control.

•Then, start the Camcorders with a tape inserted.

•The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.)

•If your camcorder is stereo, you need to connect a set of two cables.