Samsung 320MXn quick start Troubleshooting, Self-Test Feature Check, Warning Messages

Page 16
Troubleshooting

Troubleshooting

Self-Test Feature Check

Self-Test Feature Check Note

Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself.

Self-Test Feature Check

1.Turn off both your computer and the LCD Display.

2.Unplug the video cable from the back of the computer.

3.Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when the LCD Display is working normally even though no video signal is detected: While in the Self-Test mode, the LED power indicator remains green and the figure moves around on the screen.

4.Turn off your LCD Display and reconnect the video cable; then turn on both your computer and the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your video con- troller and computer system; your LCD Display is functioning properly.

Warning Messages

You can even view the screen at a resolution of 1360 x 768. However, you will receive the following message for a minute; You can choose to change the screen resolution or stay in the current mode during that time. And if the resolution is more than 85Hz, you will see the black screen because the LCD Display does not support over 85Hz.

Warning Messages Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the LCD Display.

Maintenance and Cleaning

1) Maintaining the LCD Display Case.

Clean with a soft cloth after disconnecting the power cord.

Image 16
Contents quick start guide LCD MONITOR320MX 320MXn Package Contents IntroductionUnpacking ManualsSold separately Your LCD Display FrontMENU button MENU Rear Adjust buttons Left-Right buttons / Volume buttonsRemote Control Sensor Navigate buttons Up-Down buttonsPOWER S/W ON / OFF O DC POWER OUT Power Using the Anti-Theft Kensington Lock Remote Control1. POWER 2. Off 3. Number Buttons POWER OFF Number Buttons DEL button + VOL MUTE TV/DTV MENU INFOCOLOR BUTTONS TTX/MIX STILL AUTO S.MODE MDC LOCK SOURCE ENTER/PRE-CH CH/P D.MENU GUIDE RETURN Up-Down Left-Right buttons EXIT SRS→ Movie → Speech → Custom → Custom PC / DVI / MagicInfo M/B MagicBrightUsing a Power cord with Earth Connecting a ComputerConnections Connecting to Other devices Connecting AV DevicesConnecting to a Camcorder Connecting Using a HDMI CableConnecting to an Audio System Connecting Using a DVI to HDMI CableConnecting a LAN Cable Connecting a USB device Troubleshooting Self-Test Feature CheckMaintenance and Cleaning Warning MessagesProblems related to the Installation PC Mode Symptoms and Recommended ActionsCheck List Q Check Signal Cable message Problems related to the ScreenQ Not Optimum Mode message Problems related to Audio Problems related to the Remote ControlProblems related to MagicInfo Q & AQ How can I clean the outer case/LCD Panel? Set the resolution at the Control Panel → Display → Screen SaverQ How can I play the video?