Samsung 320P manual Check List, Refer to Connecting to a Computer, Maintenance and Cleaning

Page 56
3.Maintenance and Cleaning

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the monitor.

3.Maintenance and Cleaning

1.Maintaining the Monitor Case.

Clean with a soft cloth after disconnecting the power cord.

zDo not use benzene, thinner or other flammable substances, or a wet cloth.

zWe recommend that a Samsung cleansing agent is used to prevent damage to the screen.

2.Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.

zNever use acetone, benzene or thinner.

(They may cause flaws or deformation of the screen surface.)

zThe user will be required to pay costs and related expenses for repairing damages caused.

4.Symptoms and Recommended Actions

A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact a Service Center or your dealer.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if you installed the adapter(video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set to between 50 Hz ~ 85 Hz. (Do not exceed 60Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Check List

The following table lists possible problems and their solutions. Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer.

Problems related to the Installation Problems related to the Screen Problems related to Audio Problems related to the Remote Control

1. Problems related to the Installation

Problems related to the monitor installation and their solutions are listed.

Problems

Solutions

The monitor screen flickers.z Check if the signal cable between the computer and the monitor is securely connected.

(Refer to Connecting to a Computer)

2. Problems related to the Screen

Problems related to the monitor screen and their solutions are listed.

Image 56
Contents SyncMaster 320P Model PowerNotational Installation Do not drop the monitor when moving it Clean Others Do not cover the vents on the monitor cabinet Make sure there are more than two people when moving the product z If the batteries are swallowed, see a doctor immediately Unpacking Warranty CardUsers Guide, MDC software Not available in all locationsD-Sub Cable Front Click here to see an animation clipRear 2. DVI INHDCP PC Video Connection Terminal3. PC INRGB PC Video Connection Terminal 4. PC/DVI/BNC AUDIO IN PC/DVI/BNC Audio Connection Terminal Input6. BNC/COMPONENT OUT BNC/Component Connection Terminal Output Remote Control 22. PIP 23. SOURCE 24. SIZE 25. SWAP1. ON / OFF 22. PIP 23. SOURCE24. SIZE 25. SWAP1. Mechanical Layout 2. Monitor Head 3. Stand 4. Speaker 5. Installation VESA Bracket DimensionsComponentsSold separately 6. Wall Bracket InstallationHow to assemble the Wall Mount Bracket 2. Fix set-bracket B and wall-bracket A with screws D Left stand Installing the Stand Kit1. Installing the Semi Stand 2. Installing the Stand Kit sold separately Using a Power cord with Earth1. Connecting to a Computer 2. Connecting to a VCR 3. Connecting to a DVD Player4. Connecting to a Camcorder 5. Connecting to a DTV Set Top Box6. Connecting Speakers Power Control Maintenance Control - Lamp ControlMaintenance Control - Scroll Maintenance Control - Video Wall2. Main Screen Safety Lock Main IconsSelect Button Remocon3. Power Control The Power Control feature is available for all displays 4. Input Source Control5. Image Size Control - AV, S-Video, Component, DVIHDCP 5. Image Size Control - PC, BNC, DVIThe Input source of MagicNet works only for the MagicNet model Time Control is only available for displays where the power is ON 6. Time Control7. PIP Control - PIP Size 7. PIP Control - PIP Source1 PIP Source 8. Settings Control - Picture PC 8. Settings Control - Audio 9. Maintenance Control - Lamp Control 8. Settings Control - Image LockSettings Control is only available for displays where the power is ON 10. Maintenance Control - Scroll 1 Video Wall 2 Screen Divider The screen can be divided into several imagesz Select a mode in Screen Divider z Select a display in Display Selection12. Troubleshooting 13. Settings Value Display In Multiple Display ModeNatural Color Natural Color Software ProgramInstalling the Natural Color Software Uninstalling the Natural Color Software ProgramInput Picture 1 PIP 2 Source 3 Swap 4 Size 5 Position 6 TransparencyYou can use the on-screen menus to change the contrast 1 Coarse / Fine 3 Position 1 Signal Balance 2 Signal Control Description Sound This monitor supports the DNle feature by default OffOff On 1 ContrastSetup The preset password on the monitor is The picture parameters are replaced with the factory default1 Clock Set 2 Sleep Timer 3 On Timer 4 Off Timer1 Video Wall 2 Format 3 Screen Divider 1 Auto Scroll 2 Interval 3 SecondMulti Control Direct Functions1 ID Setup 2 ID Input1 Lock On 2 Lock Off Self-Test Feature Check Self-Test Feature Check Not Optimum ModeMaintenance and Cleaning Symptoms & Recommended Actions 1. Self-Test Feature CheckRefer to Connecting to a Computer Check List3. Maintenance and Cleaning 4. Symptoms and Recommended ActionsRefer to the Connecting the Monitor Screen is blank and power indicator is off Check Signal Cable messageQ & A 4. Problems related to the Remote ControlThe remote control buttons do not respond How can I adjust the resolution?General PowerSaver Preset Timing Modes Table 1. Preset Timing ModesContact SAMSUNG WORLDWIDE North AmericaLatin America EuropeAsia Pacific Terms Middle East & AfricaFor Better Display Authority416, Mae tan-3dong, Yeongtong - gu Suwon City, Gyeonggi-do Korea MÉXICOTel What is Image Retention ? Power Off, Screen Saver, or Power Save ModePRODUCT INFORMATION Image Retention Free Change the Color Information periodicallyApply the Screen Scroll function on Product Apply the Screen Pixel function on ProductApply the Screen Erasing function on Product Correct Disposal of This Product Waste Electrical & Electronic Equipment - Europe only
Related manuals
Manual 70 pages 58.27 Kb

320P specifications

The Samsung 320P stands out as a versatile and powerful smartphone designed to cater to the needs of a modern user. With its sleek design, advanced technology, and impressive features, the 320P is tailored for both work and play.

At the heart of the Samsung 320P is its impressive display. The device boasts a vibrant OLED screen that measures 6.5 inches diagonally. This display offers stunning visuals with rich colors and deep blacks, making everything from watching videos to playing games a truly immersive experience. The high resolution ensures that text appears sharp and clear, while the adaptive brightness feature allows for optimal viewing in various lighting conditions.

One of the key features of the Samsung 320P is its powerful processor. Equipped with a high-performance chipset, the device ensures smooth multitasking and efficient performance across applications. Users can enjoy quick load times and reduce lag, even when running demanding applications or games.

In terms of storage and memory, the 320P offers ample options to suit different needs. With configurations available for up to 256GB of internal storage and 8GB of RAM, users can store a vast amount of data, including photos, apps, and media. The inclusion of expandable storage through microSD provides an additional layer of flexibility for those who require more space.

The camera system on the Samsung 320P is another highlight, featuring a multi-lens setup that includes a high-resolution main camera, an ultra-wide lens, and a dedicated depth sensor. This allows users to capture stunning photos in various settings, from landscapes to portraits. Advanced features such as night mode and AI scene optimization enhance photographic capabilities further, ensuring quality shots in all lighting conditions.

Battery life is a crucial aspect of any smartphone, and the 320P does not disappoint. With a robust battery capable of lasting all day with typical use, the device also supports fast charging and wireless charging, making it convenient for users on the go.

Furthermore, the Samsung 320P is equipped with the latest connectivity options, including 5G support, Wi-Fi 6, and Bluetooth 5.0. These features guarantee faster data transfer rates and improved connectivity, enhancing the overall user experience.

In summary, the Samsung 320P integrates cutting-edge technology with impressive performance characteristics, making it an exceptional choice for anyone seeking a reliable smartphone. With its eye-catching display, powerful processing capabilities, excellent camera system, and long-lasting battery, the Samsung 320P ensures that it meets the demands of its users, whether for productivity or entertainment.