![](/images/new-backgrounds/1206410/20641023x1.webp)
[]brightness.
Adjust buttons [] Adjust items in the menu.
Enter button [] / Activates a highlighted menu item. /
Source button Push the '', then selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode
Note : If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
AUTO button
Power button [
]/ Power indicator
Use this button for auto adjustment.
Use this button for turn the monitor on and off. /
This light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments.
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
POWER IN | Connect the power cord for your monitor to the power port on the back |
| of the monitor. |
DVI IN | Connect the DVI Cable to the DVI port on the back of your monitor. |
RGB IN | Connect the signal cable to the |
| monitor. |
ON [ ] / OFF [O] | Switch the monitor on and off. |
Kensington Lock | The Kensington lock is a device used to physically fix the system |
| when using it in a public place. (The locking device has to be |
| purchased separately. ) |
| For using a locking device, contact where you purchase it. |
See Connecting the Monitor for further information regarding cable connections.