Samsung 206BW, 226BW manual Driver Installation Instructions

Page 37

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

The monitor is in PowerSaver mode.

Press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the 'SOURCE' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Connected using the DVI

You may get a blank screen if you boot the

cable?

system before you connect the DVI cable, or

 

disconnect and then reconnect the DVI cable

 

while the system is running as certain types of

 

graphic cards do not send out video signals.

 

Connect the DVI cable and then reboot the

 

system.

I cannot see the On Screen Display.

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Unlock the OSD by pressing the [MENU / ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Is the screen displaying

Check the signal cable connection.

only one color as if

Make sure the video card is fully inserted in it's

looking at the screen

through a cellophane

slot.

paper?

 

Have the screen colors

Reboot the computer.

become strange after

 

running a program or

 

due to a crash between

 

applications?

 

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

There are only 16 colors shown on the screen. The screen colors have changed after changing the video card.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Have the Windows colors been set properly?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

Windows XP :

Set the resolution at the Control Panel → Appearance and Themes → Display → Settings.

Windows ME/2000 :

Set the resolution at the Control Panel → Display → Settings.

 

Has the video card been

Set the video card by referring to the video

 

set properly?

card manual.

There is a message that

Have you installed the

Install the monitor driver according to the

reads "Unrecognized

monitor driver?

Driver Installation Instructions.

Image 37
Contents SyncMaster 206BW / 226BW Notation PowerPage Installation Cleaning and Use Others Page Page Good Postures When Using the Monitor Page Product Information Image Retention Free Page Package Contents FeaturesMonitor & Simple stand Manual Your MonitorCable OthersFront Rear Using the Stand Connecting CablesMonitor Assembly Attaching a Base Monitor Driver Installing the Monitor Driver AutomaticInstalling the Monitor Driver Manual Page Page Page Page Page Direct Functions Control ButtonsOSD Locked & Unlock AutoMagicBright Brightness Picture OSD FunctionColor Image OSD RTA SetupInformation Or contact your dealer Check ListDriver Installation Instructions Contact the video card manufacturer for details Self-Test Self-Test Feature CheckEnvironment Useful TipsPage SyncMaster 206BW SpecificationsEPA/ENERGY PowerSaverPreset Timing Modes Preset Timing ModesPage SyncMaster 226BW PowerSaver Preset Timing Modes Page Contact Samsung Worldwide Belgium Terms Authority For Better DisplayMéxico
Related manuals
Manual 50 pages 4.92 Kb