Samsung 240MP manual Pixels, use image position to center the image, Reset, Factory default values

4_E240MP3p.fm Page 13 Monday, August 13, 2001 11:08 AM

Adjusting Your LCD Monitor

Table 1. Screen controls (Continued )

Icon	Menus and	Function Descriptions
	Sub-menus	–	+
	■ Fine	Although "Auto Adjustment" automatically finds the
	■ Coarse	optimum values of FINE and COARSE parameters as well
		as image position, it may be necessary for you to adjust
		those parameters manually. It is recommended for you to
		use "Auto Adjustment" first. If the adjustment results are
		not satisfactory, then use COARSE and FINE adjustment
		features to get the best adjustment results. Bear in mind
		that COARSE and FINE adjustments may change the
		width of the image and affect image position as well. If
		the image is clear while out of center by a couple of
		pixels, use image position to center the image.
	■ Reset	Image lock and position parameters are replaced with
		the factory default values.
	PC Position	■ Changes the location of the image.

■In case of the image is off center, use this function to center the image.

■It work only with PC source.

■ H-Position	“–CH” : Move to the Left
	“CH+” : Move to the Right
■ V-Position	“–CH” : Move to the Bottom
	“CH+” : Move to the Top

English 13

Portuguese Italiano Español Deutsch Français English