Samsung NC240 user manual Session Type, Peer Identity Method Data Fields Comment

•<Session Type>

The <Session Type> allows the administrator to configure the Portal for a PCoIP session or RDP session.

•<Identify Peer By>

The <Identify Peer By> selector allows the administrator to choose whether the peer device is identified by IP and MAC address or by Fully Qualified Domain Name (FQDN).

Table 2-2 shows the peer identity parameters available when either method is chosen. If an invalid IP address or DNS name is entered, the OSD will prompt the administrator to correct it.

Table 2-2: Peer Identity Methods

PEER IDENTITY METHOD	DATA FIELDS	COMMENT
Peer IP/MAC	Peer IP Address	PCoIP or Portal RDP client
	Peer MAC Address	PCoIP
Peer FQDN	Peer FQDN	PCoIP or Portal RDP client

•<Enable Auto-Reconnect>

The <Enable Auto-Reconnect> ption allows the Portal to automatically reconnect with the last connected Host when a session is lost.

<RDP>

The <RDP> tab allows the administrator to configure settings specific to the Remote Desktop Protocol (<RDP>).

The RDP parameters can also be configured using the Webpage Administration Interface.

Figure 2-9 : <RDP> Configuration

4-1 Installing the Software