Introduction
MENU button [MENU/
]
Opens the
Brightness button [
]
When OSD is not on the screen, push the button to adjust brightness.
>> Click here to see an animation clip
Customized Key[
]
You can customize key assignment for the Custom button according to your pref- erences.
Note
You can configure the customized key for a required function via Setup > Cus- tomized Key.
Adjust buttons [
]
These buttons allow you to adjust items in the menu.
Enter button [
] / SOURCE button
Activates a highlighted menu item.
Push the '
/SOURCE', then selects the video signal while the OSD is off. (When the 
/SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode
Note
If you select the digital mode, you must connect your monitor to the graphic card's DVI port using the DVI cable.
>>Click here to see an animation clip 
AUTO button
Use this button for auto adjustment.
>> Click here to see an animation clip
Power button [
]
Use this button for turning the monitor on and off.
Note
The button to the right of the monitor are
Touch a button lightly with your finger.
Power Indicator
This light glows blue during normal operation, and blinking blue once as the mon- itor saves your adjustments.
11