Connecting DVD / DTV Set Top Box

Connections

1.Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable.

•When using an interior antenna terminal:

Check the antenna terminal on the wall first and connect the antenna cable.

•When using an outdoor antenna:

If you are using an outdoor antenna, use a professional for installation if possible.

•To connect the RF cable to the antenna input terminal: Keep the copper wire portion of the RF cable straight.

2.Turn on the monitor.

3.Select TV using the TV / DTV.

4.Select a desired TV channel.

Note

Is weak signal causing poor reception?

Purchase and install a signal amplifier for better reception.

Note

Connect to the DVD / DTV Set Top Box input if the device has a [COMPONENT IN] connector. You can watch Component simply by hooking up the Component with the monitor as long as the power is on.