USER 
MANUAL
OSD :
H. Position - Move the OSD position to right( 
) or left(
).
V. Position - Move the OSD position to up(
) or down(
).
Transparency - Select the OSD background.
OSD Timer - Select the OSD display timing.
Language - Select a language among
English, Français, Deutsch, Español, Danish, Italiano.
Color (PC Mode) :
Color Temp - Adjust color temperature to 9300, 6500, user. (note : 9300 is factory default)
Red - Adjust red color for user.
Green - Adjust green color for user. 
Blue - Adjust blue color for user.
Utility :
Recall - Select to reset all setting to the factory default values.
Lock - Select ON or OFF
(ON : Control key lock. OFF : Control key unlock)
Exit : Turn off OSD Menu.
USER
MANUAL
MOUNTING GUIDE
Wall mountable using two methods:
1)Using the 200 mm
2)Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall.
Wall
Pad
Arm
Monitor
D-SUB CONNECTOR PIN ASSIGNMENTS
• PIN ASSIGNMENTS
Pin 1 | RED VIDEO | Pin 9 |
|
|
Pin 2 | GREEN VIDEO | Pin10 | SIGNAL CABLE DETECT |
|
Pin 3 | BLUE VIDEO | Pin 11 | GROUND |
|
Pin 4 | GROUND | Pin 12 | SAD(for DDC) |
|
Pin 5 | GROUND | Pin 13 | ||
Pin 6 | RED GROUND | Pin 14 |
| |
Pin 7 | GREEN GROUND | Pin 15 | SLC(for DDC) |
|
Pin 8 | BLUE GROUND |
|
|
|
• ACCESSORY
1. POWER CORD | 2. USER’S MANUAL | 3. PC cable | 4. Adaptor |
5. Remote Control | 6. Batteries | 7. Wall mount (Option) | 8. Rack mount (Option) |
8 | 9 |