Samsung 192B manual SetupSyncMaster 192T

User’s Manual

Setup(SyncMaster 192T)

Connecting Your Monitor

Setup-General

1.Connect the DC Adapter for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-sub (Analogue) connector on the video card.

Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

2-2.Using the DVI (Digital) connector on the video card.

Connect the DVI Cable to the DVI Port on the back of your Monitor.

3.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the D-SUB connection cable.

4.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.

5.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

You may get a blank screen depending on the type of video card you are using, if you connect simultaneously both the D-sub and DVI cables to one computer.

If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, check to see if the monitor status is set to analogue. Press Source button to have the monitor double-check the input signal source.