NEO Three Installation | Aegis Micro AegisNeo Series specs

4. NEO THREE INSTALLATION

The Aegis Neo Three is a floor-standing loudspeaker intended to be positioned clear of room boundaries and coupled to the supporting floor through spikes. If spikes are inappropriate for your floor covering, metal protection pads, coins for example, may be used between the spike and the floor.

The separately packed plinths must be attached to the bottom of each Aegis Neo Three before they can be installed. Invert each speaker onto a “protective” piece of material so as not to damage the top of the cabinet. Insert the four screws (supplied in the packaging) through the holes in the plinth and line them up with the pilot holes in the cabinet. Screw them into the cabinet making sure that the plinth is firmly attached. Failure firmly to attach the plinths will degrade the speakers’ performance.

Four M8 floor spikes and lock-nuts are supplied within the Aegis Neo Three packaging. The spikes and lock- nuts should be fitted to the underside of each Aegis Neo Three plinth once the speaker has been moved near its final location. Carefully lay the speaker on its back to gain access to the tapped holes in the plinth. Screw a spike and lock-nut into each hole leaving a length of spike extending beyond the lock-nut so that when the speaker is upright the lock-nuts will “float” just above the floor covering.

Tighten three of the lock-nuts on each speaker with a 13mm spanner leaving one lock-nut finger-tight to aid adjustment once the speaker is upright in its final position. Once the final position of each speaker has been established adjust the length of the loose spike so that the speaker is vertical and does not rock. If the floor is particularly uneven it may be necessary to loosen one of the tightened spikes to ensure that the speaker can be levelled.

Finally, tighten all loose lock-nuts. It may be necessary to re-adjust to minimise rock once the speaker has settled on the floor. Take care when installing floor spikes. They are sharp and can cause injury or pierce electrical cables.

The Aegis Neo Three can be “mass-loaded” in a compartment at the bottom of the cabinet. Mass loading can significantly improve the performance of the speaker. The compartment can be filled with washed, fully dried and non salt contaminated sand, or suitable metal chips, via the access hole in the back panel. A plastic bung is provided to seal the cabinet. If you decide not to mass-load the speakers, we still recommend fitting the plastic bung to avoid unwanted resonance. Be aware that the plastic bung has not been designed to be removable after insertion. You may wish to use a temporary removable plug until you have made a decision whether to mass-load.

Thanks to the use of neodymium magnet systems the Aegis Neo Three is intrinsically magnetically shielded and can be positioned in close proximity to magnetically sensitive equipment and media.

5. NEO CENTRE INSTALLATION

The Aegis Neo Centre is intended to be used in a home theatre system located either directly above or below the screen. It can be stood either directly on a furniture unit, integrated within a screen stand, mounted on a dedicated speaker stand or on a wall using appropriate bracket hardware.

Best results are likely to be gained if the Aegis Neo Centre is directly coupled to the floor via a dedicated spiked stand. If the screen stand is to carry the Aegis Neo Centre it is advisable to de-couple it from the screen with the supplied adhesive rubber feet so that it does not disturb the picture. If a wall bracket is to be used it should be as rigid as possible and firmly attached to a brick-built wall.

Thanks to the use of neodymium magnet systems the Aegis Neo Centre is intrinsically magnetically shielded and can be positioned in close proximity to magnetically sensitive equipment and media.

The following section provides further general advice on Home Theatre speaker positioning and room layout.

Page

AegisNeo Series specifications

The Aegis Micro AegisNeo Series represents a pinnacle of modern technology in the realm of data storage and processing solutions. This series is specifically designed for professionals and enterprises that demand robust performance, scalability, and reliability in their operations.

One of the standout features of the AegisNeo Series is its advanced flash storage technology. This allows for lightning-fast read and write speeds, significantly reducing latency when accessing and processing data. Coupled with its high IOPS (Input/Output Operations Per Second), AegisNeo ensures that even the most demanding workloads are handled efficiently, making it ideal for applications in big data analytics, virtualization, and database management.

The Aegis Micro AegisNeo Series also boasts exceptional durability and endurance, supporting a range of write-intensive applications. With an innovative wear-leveling algorithm, the series ensures that data is evenly distributed across the storage medium, prolonging the lifespan of the device and maintaining performance stability over time.

In terms of connectivity, the AegisNeo Series is equipped with multiple interface options, including SATA, SAS, and NVMe, allowing seamless integration into various systems and infrastructures. This flexibility ensures that users can easily adapt the AegisNeo devices to their existing setups, minimizing downtime and streamlining deployment processes.

Security is another critical characteristic of the AegisMicro AegisNeo Series. The devices come equipped with advanced encryption protocols, safeguarding sensitive data from unauthorized access. In addition, the series includes features such as secure erase and data at rest encryption, providing users with peace of mind regarding their data integrity and security.

Furthermore, the AegisNeo Series offers robust support for enterprise-level management features. With comprehensive monitoring tools and remote management capabilities, IT professionals can efficiently oversee the health of their storage systems, perform predictive analytics, and ensure optimal performance through proactive maintenance.

In summary, the Aegis Micro AegisNeo Series is a sophisticated solution tailored for businesses that require high-performance storage coupled with advanced features. With its state-of-the-art flash technology, durable design, flexible connectivity options, enhanced security measures, and robust management capabilities, the AegisNeo Series sets a new standard in data storage solutions. Whether for cloud computing, enterprise applications, or other critical workloads, the Aegis Micro AegisNeo Series is engineered to meet the challenges of today and the demands of tomorrow.