TV Function
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the antenna, connect the power supply cord. If the player is in standby mode, press the POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the buttons on the remote control, or use the number buttons directly, to select the desired channel.
Some preferences can be preset:
Picture Parameter Setup
Press the TV/LCD SETUP button once on the remote control to enter PICTURE setup menu, and screen display as shown:
| PICTURE |
Brightness | 11 |
Contrast | 13 |
Color | 14 |
Language | English |
Reset |
|
EXIT ◄ | ►TV SETUP |
|
|
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color). Use the ►, ◄ buttons to adjust, you can adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select English, French or Spanish.
To restore a setting to the original value, use the ▼、▲ buttons to select Reset, then press the OK button to confirm the change.
Press the ◄ button on the remote control to exit from the setup menu. Press the ► button on the remote control to enter TV Setup menu.
TV System Setup
When the ► button is pressed, the TV system setup menu will appear:
TV SETUP
Signal | CATV |
Channel | 002 |
Skip | ON |
Fine Tuning |
|
Auto Memory |
|
◄ PICTURE | EXIT ► |
- 19 -