Remote Control
Basic Operation
1. POWER button
Press to enter or exit the standby mode.
2. 0~9 Number buttons Press to select numbers.
3. 
LAST button
In the TV mode, press to return to the channel last viewed.
4. MTS button
Press to activate MTS function in TV mode.
5. VOL +/- button
Press to increase or decrease the volume.
6. CCD button
In the TV or COMPOSITE mode, press to display the closed captions or cancel display.
7. EXIT button
Press to exit the setup menu.
8. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼button to select the desired item and press the ◄► button to adjust or set.
9. ENTER button
Press to confirm your selection.
10. INFO button
Press to display the information about current status on the screen.
11. +10/
button
In DVD mode, press to select number greater than 10.
In TV mode, when select the 1~99 channel, press this button to confirm and enter the selected channel.
12. Aspect button
Press to select screen aspect ratio.
13. CH / button
In TV mode, press to select channel.
14. MUTE button
Press to turn on or off the speaker output.
15. SOURCE button
Press to select the mode DVD,
Component, VGA, TV, COMPOSITE or
16. MENU button
Press to enter the LCD setup menu.
- 10 -