![](/images/new-backgrounds/1278921/27892125x1.webp)
Remote Control
Installing the Remote Control Battery
1.Pull the battery holder out from the remote control as shown below.
2.Load a new battery properly with the (+) side up.
3.Insert the battery holder back into the remote control.
Battery Type: CR2025 3V
Battery service life: approximately 1 year under normal use (at room temperature)
Using the Remote Control
Point the remote control to the remote sensor on the unit within a
Notes:
•Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or fire. Battery leakage may damage the remote control.
•Do not expose the remote control to direct sunlight.
•Do not recharge, disassemble, deform, or heat the battery.
•Immediately replace the exhausted battery.
•Take out battery when the remote is not being used for a long period of time.
13