Panasonic SRP2003/27 user manual Buttons and functions

4Press and hold the button that does not

	function and immediately release it when
	the device responds.
•	If the button still does not function as
	expected, try pressing it again for a longer
5	period of time.
	Press the
	device selection
	button twice to save
	your settings and
	exit setup mode.		2 x
	•	When no

button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings.

3Using the universal remote control

3.1Buttons and functions

The illustration on page 2 gives an overview of all buttons on the remote control.Try out the buttons you need for operating your devices.

Notes

•Buttons having the same functions as the buttons on your original remote control may have different namings on the SRP2003 (e.g. Info / Display).

•Only functions that are available on your original remote control can be used for operating your devices with the SRP2003.

1 .................................... Setup light.

•lights up red when the remote control is in setup mode.

•lights up red when a remote control command is being sent.

2................................ selects available source inputs (antenna, cable, etc.).

3................... device selection buttons.

		Select the device to be
8	EN	operated.

4

			English
GUIDE	electronic program guide.		control
INFO	on-screen channel
MENU	menu on / off.
EXIT	information.		remote
	exits / clears on-screen
	menu displays.		universal
	in a menu.
3 4 1 2	cursor up, down, left, right
OK	confirms your selection.		the
A, B, C, D	Context sensitivity buttons,
			Using
	ordered following the
	requirements for cable
	boxes.
	A - Yellow, B - Blue, C - Red,
5	D - Green.
+ VOL -	adjusts TV volume.
.................................	mutes TV sound.
+ CH.................................-	previous program / Last.
	previous / next channel.
6
5	rewind.
2	play.
6	fast forward.
9	stop.
0	record.
;	pause.
4P 3P	previous (4P) / next
	(3P) page / track in
	various modes.
/	set your Thumb ratings.
7	used after direct channel
	selection. Some devices
	require ENTER to be
	pressed after channel
	selection.
...........................	selects between one
	and two-figure channel
	numbers.
	EN	9