PYLE Audio PLTVCP85 manual Trouble Shooting, Symptoms Cause

TROUBLE SHOOTING

Before calling service personnel, check the following points for a possible cause of the trouble. A minor adjustment on your part may eliminate the trouble.

SYMPTOMS	CAUSE	POSSIBLE SOLUTIONS
There is no power	The power cord is not	Check the power cord.
to the VCR?	connected.	Change the polarity of
	The polarity of power cord
	is not correct.	power cord.
Noise bars on	Tracking is not adjusted.	Adjust the picture to be clear
screen.		by pressing the Re-tracking.
Operation key does	If the cassette or the VCR	Turn off the power and turn on
	is not in normal condition,	the power again by pressing
not work.
	every indicator LED/LAMP	the POWER cord. Unplug and
	lights up and the VCR does	replug the power cord.
	not work.
Cassette is ejected	Safety device works to	Pull the cassette out (unloading)
upon inserting	protect the cassette when	and insert it firmly into the
	it is inserted incorrectly.	cassette compartment.
Audio output does	The cassette is recorded	The cassette can not be
	in mono VCR.	playback in Hi-Fi mode.
not change to
	The first auto tracking is	Wait for a second.
Hi-Fi mode.
	executing unit now.
No backlighting at	No 12V DC.	Check circuit fuse at source of
power button.		power
		(see vehicle/converter manual).
		In-line fuse of power cord
		(in light plug).
		Power cord unplugged from
		12V outlet or at rear of unit.

15