Hardware Kit:
Wall plate TV connection block
Bubble level
Supportable block
Supportable lever
1 2 3 4 A,C,E,G B,D,F,H I J
Part 1a-Wood Stud Mounting
ID | Qty | Description |
1 | 3 | Long bolt |
2 | 3 | Long bolt washer |
3 | 3 | Wall anchor |
4 | 1 | Box wrench |
A | 2 | M4×15mm bolt |
B | 2 | M4×16mm bolt |
C | 2 | M5×15mm bolt |
D | 2 | M5×16mm bolt |
E | 2 | M6×15mm bolt |
F | 2 | M6×16mm bolt |
G2 M8×20mm bolt
H2 M8×16mm bolt
I2 M5 taper washer
J2 M5 washer
Part |
|
Level wall plate and use wall as a template to mark three holes. Drill three 3/10”(8mm) | |
dia. holes 2”(50mm) deep. Insert three anchors(3) into holes and secure wall plate | |
with three long bolts(1) and three washers(2) by box wrench(4).Tighten screws | |
firmly. Do not overtighten. | ") |
| |
| 812mm(32 |
| 3 |
|
2”(50mm) |
|
|
| 2 | 1 |
|
| |
Φ3/8”(10mm) |
| 4 |
|
|
Part
Use wall plate as a template, make sure it is level, and mark three mounting holes along the center lines of the wood studs. Drill three 3/16”(5mm)dia.holes 2”(50mm) deep. Level wall plate and attach to wall with three long bolts(1) and three washers (2) by box wrench(4). Tighten screws firmly. Do not overtighten.
Wood stud | 2”(50mm) | ") | |
812mm(32 | |||
| |||
| Φ3/16”(5mm) |
|
2
1
4
First, select the small(A,B), medium(C,D,E,F) or large(G,H) screws. To attach supportable block by using selected screws(A,C,E,G) and washers(I), and then attach TV connection block to screen by using selected screws(B,D,F,H) and washers
(J). Tighten screws firmly but do not overtighten. WARING screws(A,B,C,D)need washer, screws(E,F,G,H) don’t need washer.
|
|
| I |
E,G |
| A,C | J |
|
| I |
|
F,H | J | B,D |
|
|
|
|
| |
|
| |||