|
| Troubleshooting | |
|
|
| |
|
|
| |
Symptom | Possible Cause | Action | |
| Loose cables | Check all keyboard cable connections to make sure they are | |
| completely seated in the sockets | ||
|
| ||
|
|
| |
| Keyboard needs to be | Unplug the keyboard from the Console Keyboard Port, then plug it | |
Keyboard Not | reset. | back in. | |
Responding* | MiniView™ Micro | Turn off computers. Unplug the cables from the unit. Wait five | |
| |||
| needs to be reset | seconds; then plug the cables back in and turn the computers on. | |
|
|
| |
| MiniView™ Micro is in | Press the Spacebar to exit AutoScan mode. | |
| AutoScan mode | ||
|
| ||
|
|
| |
| Selected port | Resend the Hot Key command selecting a port that has a | |
| connects to a | ||
| |||
| |||
|
| ||
Pressing Hot Keys | Hot Key sequence | Resend the Hot Key command - press and release each key in | |
gets no response | |||
input incorrectly | the sequence individually | ||
| |||
| MiniView™ Micro is in | Press the Spacebar to exit AutoScan mode. | |
| AutoScan mode | ||
|
| ||
|
|
|
16