Hyundai Q501, Q421S, Q421H manual How to Store Channels Automatically, Antenna connection

CHANNEL

How to Store Channels Automatically

-Your TV can memorize and store all of the available analog/digital broadcast signals for both “off-air” (antenna) and cable channels.

-Before your television can begin memorizing the available channels, make sure to specify the type of the signal source (antenna or cable) connected to your TV.

Press Menu button.

Menu items appear on the screen.

1	Press Up and Down buttons to move to			.
2	Press	button to select	.
	AUTO SCAN is highlighted.
3	Press	button to select “AUTO SCAN”.
	AUTO SCAN menu items appear.
4	Press Left and Right buttons to select the type
	of antenna connection.

- In case of ATV/DTV (ANT1) :

When watching both analog broadcast and digital broadcast at the same time with ANT1

Press Up and Down buttons to move to AIR TV or CATV.

• AIR ONLY : Watching the analog over-the-air and

digital over-the-air signals via ANT1 input port.

• CABLE ONLY : Watching the Cable and digital cable signals via ANT1 input port.

5

- In case of ATV (ANT1) + DTV (ANT2) :

When watching analog broadcast with ANT1 and digital broadcast with ANT2.

Press Up and Down buttons to move AIR + AIR, AIR + CABLE or CABLE + AIR.

•AIR(ANT1)+AIR(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital over-the-air signal via ANT2 input port.

•AIR(ANT1)+CABLE(ANT2) : Watching the analog over-the-air via ANT1 input port and the digital cable via ANT2 input port.

•CABLE(ANT1)+AIR(ANT2) : Watching the analog cable via ANT1 input port and the digital over-the-air via ANT2 input port.

6 Press Left and Right buttons to set up CABLE BAND.

*CABLE BAND NOTE : STD (Standard), HRC (HRC band), IRC (IRC band) (For further band information, contact your cable service provider.)

47