Mitsubishi Electronics SR-HD5 manual Unlocking Procedure, Temporarily Overriding the Lock

HD Receiver’s Menu System

Unlocking Procedure

To remove the lock and its restrictions, highlight the

Unlock button and press the SELECT key.

When the UNLOCK SYSTEM pop-up screen appears, you can use the ▲ and ▲ keys or the remote control number keys to enter the four-digit passcode that you used to lock the HD receiver earlier. If you enter the passcode using the number keys, you will not see the numbers appear on the screen.

After entering the passcode, highlight OK and press the
SELECT	key on the remote control.	The UNLOCK pop-up screen

Note: Once the HD receiver has been unlocked, all limits and restrictions are removed!

Otherwise, choose Cancel to keep the lock in effect.

If you forget your four-digit passcode, you must call DIRECTV for assistance.

Note: When the HD receiver is used without DIRECTV® services, the password can be cleared from the Service Test Screen. To access the Service Test Screen, press the SELECT and ▲ keys on the front panel simultaneously and then release. The smart card must not be inserted in the HD receiver.

Temporarily Overriding the Lock

There are times you may wish to temporarily remove the restrictions imposed by locking. You can do this without unlocking the HD receiver. You will be prompted by an on-screen message when you have this option to override the lock. When you press SELECT , the OVERRIDE LOCK pop-up will be

displayed. It looks and navigates just like theThe OVERRIDE LOCK pop-upUNLOCK SYSTEM pop-up panel.

Note: Once the correct four-digit passcode is entered, the HD receiver will remain unlocked until you turn the HD receiver off. The next time you turn the HD receiver on, all locks and limits will be enforced again.

Page 7-19