JVC KA-F5604U manual Mounting this card to KY-F560 Camera

Thank you for purchasing the KA-F5604U Analog output card.

OUT

COMP/VBS

By inserting this card into JVC’s color video camera KY-F560, either composite video signal, component video signal(Y/Cb/Cr), RGB signal or Y/C signal is output.

Analog output terminal

Mounting this card to KY-F560 Camera

KY-F560

KY-F560 power must be switched off before mounting the card.

	1. Remove two screws Å from the rear of the camera and
Screw Å	take out the slot cover.

Slot cover

KY-F560

2.Insert this Analog output card into the slot at the rear of

	This card	the camera and secure it by screwing back the two
		screws Å which were taken out earlier in the above
		mentioned step 1..
	OUT
	COMP/VBS
Slot		Notes
Analog output
		Ensure that the Analog output card is inserted
terminal
	Screw Å	all the way in.

5