Mitsubishi Electronics LT-3050 manual Connecting an Audio Receiver, Stereo Audio System

Connecting an Audio Receiver

Note: The TV side panel and connections shown here are for reference only and may vary by model.

Stereo Audio System

(recommended for shelf units or A/V receivers without digital audio inputs)

(Figure 7)

1.		Connect the audio cables from AUDIO
		OUTPUT on the TV side panel to TV IN or AUX
		IN terminals on the back of the audio system.
•	The red cable connects to the R (right) channel
•	The white cable connects to the L (left) channel
2.		Turn off the TV’s speakers through the AUDIO/
		VIDEO SETTINGS Menu, page 50.
3.		Set the audio system’s input to the TV or AUX

�� ���� ����� � ����

���

�

�����

����� ������ ���� ����� �������

		��	���		���� �		���� �
�	�����	��	��	��	���	��	��� ���������
		�					���
							������

position to hear the TV’s audio through your

stereo system.

���

�

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

Figure 7. Connecting the Stereo Audio System.

These types of audio connection do NOT support multi-channel digital audio. Please refer to your other devices Owner’s Guide to verify.

A/V Receiver

(Figure 8)

1.Connect either a video cable or a S-Video cable

(but not both) from VIDEO MONITOR OUT on the back of the A/V receiver to VIDEO INPUT-1 or INPUT- 2 on the TV side panel.

2.Connect a set of audio cables from AUDIO OUTPUT on the TV side panel to AUDIO TV IN on the back of the A/V receiver.

•The red cable connects to the R (right) channel

•The white cable connects to the L (left) channel

���

�

�����

�� �������� ����� ����� ��������

�

��� �����

�� ���� ����� � ����

�

������

����

���

�����

����������

�

�������

Figure 8. Connecting the A/V Receiver.

Note: Please see your A/V receiver Owner’s Guide for more detailed connections.

17

LT3050_OG_v5.ind 17

04.1.23, 11:43 AM