Mitsubishi Electronics DX-TL4709U instruction manual LOG13

Page 41
Automatically clears after 1 minute.
Click "Clear Warning" or press the E button. Click "Clear Warning" or press the E button. Click "Clear Warning" or press the E button.
Click "Clear Warning" or press the E button.
Click "Clear Warning" or press the E button. Lower the temperature. Click "Clear Warning" or press the E button. Rotate the fan. Click "Clear Warning" or press the E button. Click "Clear Warning" or press the E button.

 

 

Warning Display

Countermeasure

Cancelling

Log number

CALL OUT

 

 

output

 

 

 

 

 

 

 

the warning

 

 

#1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No Camera Signal

• Check whether the unit and

Stop recording.

LOG54

#7

Fixed

 

 

 

camera are properly connected

 

 

 

 

 

 

 

 

Camera signal is lost or distorted.

and turned on.

 

 

 

 

 

 

 

 

Please check the camera and cable

• Check whether the video signal is Output video

 

 

 

 

 

connection.

 

being properly outputted.

signals.

 

 

 

 

 

 

 

• Check whether the camera with

Click "Clear

 

 

 

 

 

 

 

no video signal input is set for

Warning" or press

 

 

 

 

 

 

 

operation.

the E button.

 

 

 

 

 

It can use as it is though a slight error

• Continue the operation when

Automatically

LOG13

#8

None

 

occurred.

 

there is no abnormality.

clears after 1

LOG33

#8

 

 

 

 

 

• When the error occurs

minute.

LOG43

#8

 

 

 

 

 

continuously, check the

 

 

 

 

LOG73

#8

 

 

 

 

 

HDD/media and cable and then

 

 

 

LOG23

#8

 

 

 

 

 

restart the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System suspended due to unstable

• Start operation again.

Click "Clear

LOG14

#8

Fixed

 

 

processing. Recording will be resumed.

• Turn the power on again using

Warning" or press

 

 

 

 

 

HDD

was disconnected.

POWER button on the front

the E button.

 

 

 

 

 

System suspended due to unstable

panel.

 

 

 

LOG74

#8

 

 

 

processing. Start operation again.

• Turn the power on again using

 

 

 

LOG24

#8

None

 

 

 

MAIN switch on the rear panel.

 

 

 

LOG34

#8

 

 

 

 

 

 

 

 

 

 

 

 

LOG44

#8

 

 

 

The recorder detected the data altered or data

 

 

 

 

 

 

 

LOG55

#7

None

 

recorded by other recorder.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recorder detected technical problems

 

 

 

 

 

 

 

LOG6200

 

Fixed

 

on the device.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The recorder has been rebooted. The problem • Check the unit.

 

 

 

LOG5100

 

Fixed

 

is not critical, but check the recorder.

 

 

 

 

 

 

 

 

 

 

 

Internal temperature is getting too high, check the ventilation of the recorder.

• Turn off the power and change

LOG5200

Fixed

the installation condition.

 

 

Internal temperature is getting too high,

• Turn off the power and change

 

LOG5201

Fixed

stop the operation of the recorder

the installation condition.

 

 

 

immediately.

 

 

 

 

 

 

 

 

 

The fan of the recorder needs to be checked.

• Turn off the power and stop

 

LOG5300

Fixed

 

using.

 

 

 

 

 

 

 

 

Copying data stopped because of new record

• Stop HDD recording to continue

 

LOG3500#5

None

overwrites the old data.

copy/backup.

 

LOG7500#6

 

 

 

 

 

 

New record will soon overwrite the old data

• Stop HDD recording to continue

 

LOG3600#5

None

in copying.

copy/backup.

 

LOG7600#6

 

Stop the recording, if you want to continue the • Stop copy/backup to continue

 

 

 

copying.

HDD recording.

 

 

 

(NONE)

• Restarts by watchdog operation

 

LOG5101

 

or for self-recovery.

 

LOG5102

 

 

 

 

 

 

 

LOG5103

 

#Regarding LOG14 : Displays during recording. The system shuts down once and then resumes recording. (The error HDD is automatically deleted from the recording device. The recording is continued until all the registered HDDs are used up.)

#Regarding LOG24 to 74 : Displays during copying or playback. The playback or copy stops because the system shuts down. Carry out playback or copy again.

#Regarding LOG 54 : Displays during recording when the video signal is not existed for the camera being recorded for 2 seconds or more. This warning may not be displayed for the recording of which recording time is less than 2 seconds.

Warnings and CALL OUT output

37

Image 41
Contents DX-TL4709U Page Avertissement Important safeguards Replacement Parts Damage requiring ServiceSafety Check ServicingUnplug the Power Cord During a Long Absence Disclaimer Recordable time and product warrantyInstallation Location and Handling Contents Page Software License Agreement Setting the menus How to set the menusSetting the menu using a mouse Setting the menu using the front panel buttonsSelecting an item Displaying a menu screenClosing a menu screen Using the front buttons of the unit Setting parametersUsing a mouse Inputting numbersMotion Search Main Normal 116 000 Symbols in the menusTime/Date Setting Setting the time and dateMultiplexer buttons Using the basic multiplexer functionsBasic multiplexer functions Controlling the camera PTZ control using the menuPTZ control using the front panel buttons Basic manual recording Recording the picture manuallyTo change the playback device Playing back the recorded dataBasic playback Search by Time and Date Searching the desired pictureBasic search Searching the desired picture Search by Alarm ListCopy Data to Copy 1 Drive/Set Copy 1 Drive Copying the recorded dataCopy Data to Copy 2 Drive/Set Copy 2 Drive Copying the recorded dataCopying the data of this unit to a video cassette System requirements Playback softwareStarting up the application software Operational panelSearch menu File menuOperation menu Bookmark menuCommunications by Web Browser LoginCommunications by Web Browser Personal computer product requirementsMain Menu Live Monitoring Communications by Web BrowserTime Search PlaybackImage Search Alarm List SearchConfiguration Menu User Registration Recorder Title & Camera Titles Mail SetupCommunications by Web Browser Clock Setup Access Mode SetupLogout Change Login User Installation TroubleshootingTroubleshooting HDD Countermeasure CancellingLOG13 Page

DX-TL4709U specifications

The Mitsubishi Electronics DX-TL4709U is a high-performance digital video recorder (DVR) designed for advanced surveillance applications. It stands out as a robust solution for both commercial and industrial environments, providing superior functionality and ease of use. With its capacity to manage multiple camera inputs, the DX-TL4709U is ideal for comprehensive security monitoring.

One of the key features of the DX-TL4709U is its ability to support up to 9 camera inputs simultaneously. This allows users to monitor multiple locations or angles in real-time, enhancing the overall effectiveness of security surveillance. The device is equipped with advanced video compression technology, which optimizes storage by reducing file sizes without compromising video quality. This feature is crucial for extended recording periods, allowing for months of continuous surveillance on a single hard drive.

In terms of connectivity, the DX-TL4709U comes with various ports, including USB and network interfaces, facilitating easy integration into existing security systems. The device supports both wired and wireless camera setups, providing flexibility tailored to specific needs. Additionally, the unit is compatible with a variety of monitoring software, further enhancing its functionality.

User experience is a priority with the DX-TL4709U, featuring a user-friendly interface that simplifies operation and access to recordings. This DVR includes remote viewing capabilities, allowing users to access live video feeds and recorded footage from smartphones, tablets, or computers. This ensures that security can be maintained even when personnel are off-site.

Another notable characteristic is its ability to perform advanced motion detection and recording. Users can set specific zones within the camera's field of view where motion detection is active, minimizing false alarms and optimizing storage use. The intelligent search feature also allows for quick retrieval of specific footage based on motion events.

Built with reliability in mind, the DX-TL4709U is designed for 24/7 operation in challenging environments. The unit offers a durable construction suited for rack mounting, making it an ideal choice for businesses focused on providing a secure atmosphere.

Overall, the Mitsubishi Electronics DX-TL4709U combines advanced technology, user-friendly features, and reliable performance, making it an excellent choice for any security-conscious organization. Its versatility and robust feature set position it as a leader in the domain of digital video recording solutions.