Mitsubishi Electronics LT-40133 manual Viewing Camera Files, Jpeg Photos and the USB Photo Port

344. TV Operation and Features

Viewing Camera Files

JPEG Photos and the USB Photo Port

1.Connect your digital camera or USB drive to the USB Photo port on the side of the TV. If using a camera, power it on and set it to playback mode.

The USB Photo menu
displays while files
are still being read.
Wait until you see the
completion message	NPEFM -5 POMZ
on screen before
continuing.

Note: Some manufacturers’ devices may be incompat- ible with the TV. If the TV is unable to display your photos, you can:

•Try transferring files to a different USB device.

•Use the camera’s composite video output as described later in this chapter.

USB Photo menu

2.After files have been read, you can do the following from the USB Photo menu:

USB Photo Menu Options

Start slide show.	With the Slideshow icon high-
	lighted, press	or ENTER.

Activate menu options. Highlight an icon and press ENTER to:

•start the slide show

•display picture thumbnails

•open the Media Setup submenu.

Display or close the	Press MENU.
Main menu.
Display status for the	Press INFO.
file source.
Select a different con- 1.		Press INPUT.
nected device	2. Highlight the icon for a dif-
		ferent device.
	3.	Press ENTER.
Clear status display	Press EXIT.
or menu to show the
USB Photo menu

JPEG Thumbnail Menu

Use these keys while viewing JPEG thumbnail images:

Keys for the JPEG Thumbnail Menu

	Move the highlight from image to image.
FORMAT	Rotate the thumbnail clockwise in 90˚
	increments
or	Play the slide show starting with the high-
	lighted thumbnail.
ENTER
	Highlight the last thumbnail on the current
	page.
	Highlight the first thumbnail on the current
	page.
CH/PAGE  /	Display the next or previous page of
	thumbnails.
EXIT	Close the Thumbnail menu and display
	the USB Photo menu.
MENU	Close the Thumbnail menu and display
	the Main menu.
INPUT	Close the Thumbnail menu and display
	the Input Selection menu.

Notes on Viewing JPEG Files

•Large files or high-capacity storage devices may take a long time to display. The screen will be blank while files are read.

•Use only one source device at a time.

•The TV ignores all commands while reading files. Wait for the completion message before continuing.

IMPORTANT

Stop playback or change to a different TV input before disconnecting from the USB photo port.