Operating Instructions, Power, Nicam | Mitsubishi Electronics DV321

OPERATING INSTRUCTIONS

USE OF THE REMOTE CONTROL

POWER

Press to turn on/off the TV. The TV is never completely powered off unless it is physically unplugged.

Press or (or ▲ or ▼ button) to browse through the TV channels which are not erased.

0~9/100 Digit buttons

To select a TV channel.

VOL

Press + or – (or or button) to adjust the volume.

NICAM

To select Mono /Stereo/Sound A /Sound B/Sound AB from TV RF input.

SLEEP

With this key you can set a time period after which the TV should switch itself to standby. Press the key repeatedly to select the number of minutes. The counter runs from 30, 60, 90, 120 minutes. The timer begins to count down from the number of minutes selected after the display has disappeared.

PIP

Select PIP on/off.

MENU Press repeatedly to display OSD menu.

DPF

Not support.

WIDE

Includes 3 modes: Press repeatedly to select 4:3 /16:9 /

16:9 non-Linear.

SWAP

Not support.

MUTE

Temporarily interrupt the sound or restore it.

DISPLAY

(1)Display Channel number when use RF input.

(2)Display input source when use other input except TV RF input.

RECALL

To display the previously selected TV channel.

TV/VIDEO

Select your input source: press repeatedly to select TV, AV1, AV2, S-VIDEOor COMPONENT mode, according to where you connected your external source.

yAV1/AV2 for a VCR connected to the AV connectors of the TV.

yS-VIDEOfor a S-Video VCR connected to the S- VIDEO connector of the TV.

yCOMPONENT for a DVD/DTV Set Top Box or another component video device connected to Y, Pb, Pr and to the AV AUDIO inputs L and R.

WIRELESS

Not support.

select your input source to PC.