Planar PLL2010W manual Operation Instructions, FCC Warning

Page 3

Operation Instructions

Thank you for purchasing the PLL2010W LED LCD monitor. Please read this guide thoroughly before installation.

FCC RADIO FREQUENCY INTERFERENCE STATEMENT

WARNING: (FOR FCC CERTIFIED MODELS)

This LED LCD Monitor has been tested and found compliant with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection against harmful interference to a residential installation. This LED LCD Monitor generates, uses, and can radiate radio frequency energy. Harmful interference to radio communication may be the result if it‘s not properly installed and used. However, there is no guarantee that interference will not occur in a particular installation. If this LED LCD Monitor does cause serious interference to radio or television reception, resetting may correct it. Moreover, users are encouraged to reduce interference by doing one or more of the following:

Reorient or relocate the receiving antenna.

Move the LED LCD Monitor and the receiver further away from each other.

Connect the LED LCD Monitor into an outlet on a circuit different from that to which the receiver is connected.

Consult your local dealer or a qualified technician.

FCC Warning:

To assure a continued FCC compliance, a user must use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes or modifications to this LED LCD Monitor would void the user‘s authority to operate this device.

Note: If necessary, shielded interface cables and AC power cord must be used to meet the emission level limits.

1

Image 3
Contents PLL2010W Content FCC Warning Operation InstructionsAvertissement de la FCC Unpacking Instructions Safety PrecautionsConsignes de sécurité Package Overview First Setup Install the stand baseDisconnecting the stand base ① ② ③ ④⑤⑥ Front View of the ProductRear View of the Product Quick Installation OSD Lock Out Function Basic Operation and Calibration/Reset InstructionsPower On/Off Using the OSD MenuPage Short Cuts Function from the buttons Advanced Operation-OSD MenuPage Page Supporting Timing Modes Technical Information Attaching The Optional Wall Mount Arm not supplied Wall-Mount Installation InstructionsWrong or abnormal colors TroubleshootingNo power Power on but no screen imageCables and Accessories Technical Support Planar SupportPlanar Support 2014