CP1 (LINE) | | | | | | | |
CP2 (SHIFT) | | | | | | | |
| Row 1 | | | | | | Row 2 |
UD3 | 1 | 5 | 9 | 629 | 633 | 637 | 1 |
| | | | | | |
UD2 | 2 | 6 | 10 | 630 | 634 | 638 | 2 |
| | | | | | |
UD1 | 3 | 7 | 11 | 631 | 635 | 639 | 3 |
| | | | | | |
UD0 | 4 | 8 | 12 | 632 | 636 | 640 | 4 |
| | | | | | |
| Row 2 4 1 | | | | | Row 2 4 2 |
LD3 | 1 | 5 | 9 | 629 | 633 | 637 | 1 |
| | | | | | |
LD2 | 2 | 6 | 10 | 630 | 634 | 638 | 2 |
| | | | | | |
LD1 | 3 | 7 | 11 | 631 | 635 | 639 | 3 |
| | | | | | |
LD0 | 4 | 8 | 12 | 632 | 636 | 640 | 4 |
| | | | | Pixel no. | n |
Figure 4. Data Format.
Self-Test Mode
The display incorporates a self-test mode composed of a 1x2 checkerboard pattern that inverts every few seconds. The self-test mode is entered by applying power to the display with the S signal static. The display remains in this mode until two (2) low-to-high transitions of the S signal are detected. The display then enters and remains in normal (user video driven) operation as long as power is applied. To enter self-test mode again, the display must be reset by cycling the VH power input.
EL640.480-AF1 VGA Operations Manual (020-0349-00A) | 9 |
