JVC AV-20D303, AV-27D303, AV-27D203 manual Troubleshooting, Problems Check

Page 47

Troubleshooting

PROBLEMS

CHECK

There is no power

• See if the power cord became unplugged.

 

• Check for a blown fuse or circuit breaker or a power outage.

 

 

There is no picture

• The antenna could be disconnected.

or sound

• The input mode could be set improperly. See page 45.

 

• The tuner (Auto Tuner Setup) could be set improperly. See page 25.

 

• The TV station may be having difficulties. Check to see if other stations are working.

 

 

Remote control is not

• Check to see that the batteries are still working and properly installed.

operating properly or

• Make sure the remote has a clear sight path to the TV.

at all

• Check that the TV/CATV switch is in the proper position. (Except for RM-C205)

 

• You may be too far from the TV. You must be within 23 feet (7 meters).

 

 

You cannot select a

• Make sure the channels have been programmed. See "Channel Summary", page 28.

certain channel

• Check to see if the channel is locked. See "Channel Summary - Lock" page 28.

 

 

The power turns off

• Make sure the set did not become unplugged.

by itself

• Perhaps the On/Off Timer is set. See page 40.

 

• Check to see if the Sleep Timer was set. See page 44.

 

 

The clock is wrong

• The power was interrupted and the clock was not reset. See page 26.

 

 

The On Timer is

• There is a problem with the TV. Unplug the set and call for service.

blinking

 

 

 

The color quality

• Tint and Color may be improperly adjusted. See page 37.

is poor

• The Video Status mode may be turned to the wrong setting. See page 44.

 

 

There are lines

• There could be interference from another electrical appliance, such as a computer,

across the picture

another TV or VCR. Move any such appliances further away from the TV.

 

 

The picture is spotted

• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,

 

operating nearby. Move the antenna away from the appliance or change to a coaxial

 

cable connection which is less prone to interference.

 

 

There are double

• A building or passing airplane can reflect the original signal and produce a second,

pictures (ghosts)

slightly delayed one. Adjust your antenna position.

 

 

Picture is snowy

• Your antenna may be damaged, disconnected or turned. Check the antenna

(image noise)

connection. If the antenna is damaged, replace it.

 

 

Screen is 40% black

• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 41.

 

 

Stereo or bilingual

• Make sure the MTS settings are correct. See "MTS" on page 39.

programs can't be

 

heard

 

 

 

There is no picture

• Check your AV Cables to make sure they are connected tightly and properly.

being displayed for

• In case you are connecting using component cables to V2, make sure in the onscreen

V2 COMPONENT-IN*

menu system, you have "YES" selected for the V2 COMPONENT-IN.

 

See page 17 and 42.

 

• In case you are connecting using composite cables to V2, make sure you have 'NO"

 

selected for the V2 COMPONENT-IN. See page 17 and 42.

 

* AV-27320 has "V1 COMPONENT-IN" instead of "V2 COMPONENT-IN".

 

 

Static electricity

• It is normal to feel static electricity if you brush or touch the screen.

 

 

You hear occasional

• It is normal for the TV to make crackling sounds when first turned on or off. Unless

crackling sounds

the sound or picture become abnormal, this is fine.

 

 

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Important Note to the Customer Please NoteImportant Safety Precautions Important Recycling Information Important SafeguardsInstallation Please read and retain for your safetyTherefore USEService Table of Contents Matching TV stand is also available optional RF Connectors Input PlugUnpacking Your Television Video PlugModel AV-27320 Rear Panel DiagramsTV Models and Remotes Guide Models AV-27D303 and AV-27D203Models AV-27330 and AV-27S33 Front Panel DiagramsModel AV-20D303 Remote Control RM-C205 Model AV-27320 Remote Control RM-C255 Remote Control RM-C252Basic Operation Quick SetupStep One The Remote Control Getting StartedIllustration of AV-27D303 Step Two Making Basic ConnectionsProceed to Step Three Step Three The Plug In Menu Quick Setup is completeCable and VCR Connections Diagram #1Connections Diagram #2 Diagram #3 Connecting to a DVD player Headphone Connection AV-20D303 only Connecting to an External AmplifierConnecting to a Camcorder Remote Control Basics Remote ControlCable Box or Satellite codes Setting the CATV, VCR and DVD CodesRemote Programming MGA VCR codesJVC DVD codesOnscreen Menus Using the GuideOnscreen Menu System Initial Setup Picture Adjust CLOCK/TIMERS Sound AdjustLanguage Auto Tuner SetupPlug In Menu IntroductionAuto Clock Set Thank YOU Manual Clock SetChannel Summary Channel SummarySpecial Note about Ratings ChipUS V-Chip Ratings Directions to set US V-Chip Ratings Setting US V-Chip RatingsExample Setting ratings with the V-Chip buttonDirections to set Movie Mpaa Ratings Movie RatingsDirections to set Canadian V-Chip Ratings Canadian V-Chip RatingsDirections to Block Unrated Programs Unrated ProgramsSet Lock Code Picture Settings Noise Muting Color TemperatureBalance Sound SettingsBass TrebleGeneral Items On/Off TimerFront Panel Lock Closed CaptionXDS ID is available on all models except for AV-27320 Auto Shut OffXDS ID V2 Component-In / V1 Component-InDisplay Button FunctionsMenu ExitHyper Surround RM-C255, RM-C253 and RM-C252 only Sleep TimerSleep Timer Message Video StatusInput BBE RM-C252 only100+ Button Return+VCR Buttons TV/CATV Switch RM-C255, RM-C253 and RM-C252 onlyVCR/DVD Switch RM-C255, RM-C253 and RM-C252 only TheaterPro D6500K RM-C253 and RM-C252 onlyProblems Check TroubleshootingLabor WarrantyThis limited warranty provided by JVC does not cover PartsJVC Company of America Accessories Authorized Service CentersHOW to Locate Your JVC Service Center Do not service the television yourselfDVD Player Search Codes Function Search CodesCable/Satellite Search Codes Function VCR Search Codes FunctionSpecifications subject to change without notice Specifications
Top Page Image Contents