JVC AV-21MXP6/V, AV-25MXP6/V Disassembly Procedure AV-29MXP6/V Removing the Rear Cover

Page 10

3.3DISASSEMBLY PROCEDURE [AV-29MXP6/V]

3.3.1REMOVING THE REAR COVER

• Unplug the power cord.

(1) Remove the 16 screws [A] as shown in Fig.3.

(2) Withdraw the REAR COVER toward you.

CAUTION:

When reinstalling the rear cover, carefully push it inward after inserting the MAIN PWB into the REAR COVER groove.

3.3.2REMOVING THE CHASSIS (CHASSIS BASE AND CONTROL BASE)

Remove the REAR COVER.

(1)Slightly raise the both sides of the CHASSIS by hand and remove the 2 claws [B] under the CHASSIS from the front cabinet as shown in Fig.3.

(2)Withdraw the CHASSIS backward.

(If necessary, take off the wire clamp, connectors etc.)

NOTE:

When conducting a check with power supplied, be sure to confirm that the CRT earth wire is connected to the CRT SOCKET PWB and the MAIN PWB.

3.3.3REMOVING THE AV TERMINAL BOARD

• Remove the REAR COVER.

(1) Remove the 4 screws [C] as shown in Fig.3.

(2) When you pull out the AV TERMINAL BOARD in the direction of arrow [D] as shown in Fig.3, it can be removed.

3.3.4REMOVING THE CONTROL BASE

Remove the REAR COVER.

Remove the CHASSIS.

(1)While pushing down the 2 claws [E] as shown in Fig. 4 and pull out the CONTROL BASE in the direction of arrow [F] as shown in Fig. 4, the control base can be removed.

(If necessary, take off the wire, connectors etc.)

3.3.5REMOVING THE SPEAKER

• Remove the REAR COVER.

(1) Remove the 2 screws [G] as shown in Fig.3.

(2) Withdraw the SPEAKER backward.

(3) Follow the same steps when removing the other hand

SPEAKER.

3.3.6CHECKING THE MAIN PW BOARD

To check the back side of the MAIN PWB.

(1)Pull out the CHASSIS and CONTROL BASE. (Refer to the procedure described in REMOVING THE CHASSIS)

(2)Put the CHASSIS in upright position with the MAIN PWB's solderside faced to the right. The FBT must be positioned on top. (Viewed from the rear)

(3)Put the CONTROL PWBs in an appropriate position, taking care not giving tension to the ribbon cables that connect to the MAIN PWB.

CAUTIONS:

Use insulating materials, if necessary, to avoid possible electrical contacts between PWBs and expose terminals, etc.

Before turning on power, make sure that the CRT earth wire and other connectors are properly connected.

When repairing, connect the DEG. COIL to the DEG. con- nector on the MAIN PWB.

3.3.7WIRE CLAMPING AND CABLE TYING

(1) Be sure to clamp the wire.

(2) Never remove the cable tie used for tying the wires together.

Should it be inadvertently removed, be sure to tie the wires with a new cable tie.

1-10 (No.YA476)

Image 10
Contents AV-29MXP6/V Items Contents AV-21MXP6/V AV-25MXP6/V AV-29MXP6/VAlternate Check Method Safety PrecautionsLeakage Current Check No.YA4761-3Picture Mode Features DVD Picture ModeAuto Signal Detect Cinema SurroundTechninal Information Main MI-COM CPU PIN Function No.YA4761-5Removing the Main PW Board Disassembly Procedure AV-21MXP6/V Removing the Rear CoverWire Clamping and Cable Tying Removing the SpeakerAV-21MXP6/X No.YA4761-7Disassembly Procedure AV-25MXP6/V Removing the Rear Cover AV-25MXP6/V No.YA4761-9Removing the AV Terminal Board Disassembly Procedure AV-29MXP6/V Removing the Rear CoverRemoving the Chassis Chassis Base and Control Base Remove the Rear Cover Remove the 4 screws C as shownFront Side No.YA4761-11Memory IC Replacement MenuRemote Control Direct Operation System Constant SettingSettings of Factory Shipment Button Operation Remote Control Menu Operation Picture SettingService Mode Setting Items Feature SettingInstall Setting VSM PresetSoldering Iron Replacement of Chip ComponentHow to install Chip parts Resistors, capacitors, etc Transistors, diodes, variable resistors, etcAdjustment Items „ Check Items Adjustment PreparationPreset Setting Before Adjustment „ VSM Preset SettingFront Adjustment Location AV-21MXP6/V, AV-25MXP6/VNo.YA4761-17 Main PWB ASS’Y CRT Socket Adjustment Location AV-29MXP6/V18 No.YA476 Memorize the Adjustment Data Service Mode ItemsSetting Method Release of Service ModeService Mode Flow Chart 20 No.YA47632 ~ +31 Initial Setting Value of Service ModePAL Secam NTSC3 NTSC4 Video No.YA4761-2122 No.YA476 No.YA4761-23 100Hz 300Hz 1kHz 3kHz 8kHz AV-21MXP6/V FunctionMode AV-25MXP6/V Function+11 AV-29MXP6/V Function+12 No.YA4761-25S.CR 32 ~ +31 Compress43 50Hz Others 60Hz LIN 32 ~ +3143 50Hz 50Hz 60HzTheater Bright SoftCool Warm Normal Theater B1 Voltage Adjustment Procedure Check ItemMeasuring Test point Adjustment part Description Instrument High Voltage HV voltmeterAGC Delay PointTuner / if Circuit FocusNtsc V. Position PositionPAL V. Position SizeSide PIN PAL H. SizeNtsc H. Size PAL Side PINNtsc V. Linearity LinearityPAL V. Linearity Corner PINPAL H. BOW BOWNtsc H. BOW Ntsc Trapezium PIN Follow the same to 7 as in PAL Side PINPAL Trapezium PIN Select 8. COR-UPWhite „ Video 2 SET ComponentVideo Circuit Composite White BalanceContrast SUB BrightSUB SUB ColourNtsc 3.58 Tint SUB TintPAL Tint Ntsc 4.43 Tint1. R Drive to 3. B Drive to the values VSM Preset SettingSTANDARD, Soft and Theater Warm and NormalPurity and Convergence „ Purity Adjustment „ Dynamic Convergence Adjustment „ Static Convergence AdjustmentNo.YA4761-41 Self Check Items Indication by the Power LEDSelf Check Functions Outline Self Check Indicating FunctionVPT Schematic Diagrams Copyright 2006 Victor Company of Japan, LimitedIndications on the Circuit Diagram SafetyIndication of Parts Symbol Example Specified Voltage and Waveform ValuesMain PWB Pattern ContentsAV-21MXP6/V, AV-25MXP6/V AV-29MXP6/V 2No.YA476Main PWB No.YA4762-32-4No.YA476Front Control PWB1/2 Main PWB Circuit Diagram AV-21MXP6/V 1/4 2/4 SHEET1 No.YA4762-72-8No.YA476Main PWB Circuit Diagram AV-21MXP6/V 3/44/4 SHEET2 No.YA4762-92-10No.YA476Main PWB Circuit Diagram AV-25MXP6/V 1/4 2/4 Sheet No.YA4762-112-12No.YA476Main PWB Circuit Diagram AV-25MXP6/V 3/44/4 SHEET4 No.YA4762-132-14No.YA476Main PWB Circuit Diagram AV-29MXP6/V 1/2 Sheet No.YA4762-152-16No.YA476Main PWB Circuit Diagram AV-29MXP6/V 2/2 Sheet No.YA4762-172-18No.YA476CRT Socket PWB Circuit Diagram AV-29MXP6/V Sheet No.YA4762-192-20No.YA476Front Control PWB Circuit Diagram AV-29MXP6/V Sheet No.YA4762-212-22No.YA476Bass PWB Circuit Diagram Sheet No.YA4762-232-24No.YA476Front No.YA4762-25 26No.YA476Main PWB Pattern AV-29MXP6/V No.YA4762-272-28No.YA476Bass PWB Pattern Parts Side CRT Socket PWB Pattern AV-29MXP6/VBass PWB Pattern Solder Side No.YA4762-292-30No.YA476Front Control PWB Pattern AV-29MXP6/V No.YA4762-312-32No.YA476Voltage Charts AV-21MXP6/V, AV-25MXP6/V No.YA4762-332-34No.YA476Waveforms AV-21MXP6/V, AV-25MXP6/V No.YA4762-3536No.YA476 Main PWBNo.YA476 Parts List No.YA4763-1Contents Using P.W. Board & Remote Control Unit No.YA4763-3106 103 105 104 T522 100 V01 L01 101 1024No.YA476 Printed Wiring Board Parts List No.YA4763-56No.YA476 No.YA4763-7 8No.YA476 No.YA4763-9 487 5 10No.YA476No.YA4763-11 V01 L01 100 101 102 106 103 105 104 12No.YA476Main P.W. Board Assy SCW-1646A-H2 No.YA4763-1314No.YA476 No.YA4763-15 16No.YA476 No.YA4763-17 18No.YA476 B Assy AV-29MXP6/VV01 L01 100 101 103 DY01 2822 3018 102 40 T522 No.YA4763-19Main P.W. Board Assy SCW-1647A-H2 20No.YA476No.YA4763-21 22No.YA476 No.YA4763-23 CRT Socket P.W. Board Assy SCW-3037A-H2 24No.YA476Bass P.W. Board Assy SCW-6003A-H2 No.YA4763-25Packing Packing Parts List Colour Television Do not allow objects or liquid into the cabinet openings Knowing your TV’s features Main featuresRemote control buttons and basic functions No. PressRemote control buttons and basic functions TV buttons and functions Front of the TVSetting up your TV Turn off the equipment including the TV before connectingSetting up your TV Picture Mode Basic setting for pictureColour System Picture Setting White Balance Picture BoosterCompress Advanced setting for pictureAI ECO Sensor ECO/ECO Mode Blue BackOriginal features for picture PIPSound System Basic setting for soundSound Mode BalanceCinema Surround Advanced setting for soundAI Volume EqualizerDVD Sound Mode Auto Signal DetectDVD Picture Mode DVD MenuCustomized setting VIDEO-2 Setting Display BeepTV channel presetting Auto ProgramDelete TV channel presetting CH/CC number Before connecting Additional preparationTroubleshooting Specifications AV-25MXP6Model AV-29B316 AV-29M316 AV-29S356 AV-29B316BK

AV-29MXP6/V, AV-21MXP6/V, AV-25MXP6/V specifications

The JVC AV-25MXP6/V, AV-21MXP6/V, and AV-29MXP6/V are a trio of high-performance CRT televisions that represent a combination of cutting-edge technology and practical design, catering to the diverse needs of home entertainment enthusiasts. These models are characterized by their impressive picture quality, robust build, and user-friendly features, making them a prominent choice during their production era.

One of the key features of these models is their screen sizes, which cater to different room sizes and viewing preferences. The AV-25MXP6/V offers a compact 25-inch display, ideal for smaller living spaces or bedrooms, while the AV-21MXP6/V with its 21-inch screen is perfect for desk setups or as a secondary television. The AV-29MXP6/V, on the other hand, boasts a larger 29-inch display, making it suitable for home theaters or larger family rooms.

JVC is renowned for its superior picture technology, and these models are no exception. They utilize a high-quality CRT screen that provides deep contrast, vivid colors, and sharp details. The picture performance is further enhanced by JVC's proprietary circuitry, including a dynamic contrast system that adjusts brightness and contrast levels based on the content being displayed, resulting in a more immersive viewing experience.

Moreover, these televisions come equipped with several input options, including RF, composite, and S-video inputs, allowing users to connect multiple external devices such as DVD players, game consoles, and VCRs. With built-in tuners, viewers can easily access over-the-air broadcasting, making these models versatile entertainment hubs.

Another noteworthy characteristic is the user-friendly interface that JVC has engineered into the AV-25MXP6/V, AV-21MXP6/V, and AV-29MXP6/V models. The on-screen menu provides quick access to settings and customization options, allowing users to tailor the viewing experience to their preferences, including the ability to adjust color tones and picture settings.

In addition to their functionality, these televisions also sport an elegant design that incorporates a sleek frame and aesthetically pleasing finish, making them a suitable complement to any home décor.

Overall, the JVC AV-25MXP6/V, AV-21MXP6/V, and AV-29MXP6/V models represent a harmonious blend of technology, style, and user-centric features, making them reliable choices for anyone seeking quality CRT televisions for their home entertainment needs. Though newer technologies have since emerged, these models remain a fond memory for many who experienced their remarkable performance.