JVC LET0141-002A Using the remote control unit, To use the remote control unit for TV operation

Page 28

Getting started

Using the remote control unit

You can operate the unit with the remote control unit, and you can also operate your TV or other components with the remote control unit.

To use the remote control unit for TV operation

You can operate a JVC TV with the remote control unit. To operate another manufacture’s TV, you have to change the remote control signal. Also refer to the manual supplied with your TV.

Manufacturer code list

No.	Manufacturer

01	JVC

02	MAGNAVOX

03	MITSUBISHI

04	PANASONIC

05	RCA
06	SHARP
07	SONY
08	TOSHIBA

09	ZENITH

10	HITACHI

11	PANASONIC

12	SAMSUNG
13	SANYO
14	SANYO
15	SAMSUNG

Changing the remote control signal

1 Set DVD	TV	CATV on the remote control unit to TV.

TV

2Press and hold , then press SET . TVPOWER

Do not release	TV	POWER	until the next step is completed.
	POWER. Keep holding

TV

3 Holding POWER, enter the manufacturer’s code (two digits) using 0 to 9 . See the lists on the right to find the manufacturer’s code.

TV

4Release POWER.

The following buttons can be used for operating the TV:

TV	Turns the TV on or off.
POWER

+	Changes the TV channels.
CH	Changes the TV channels.
–	(with	DVD		TV		CATV	set to TV only)
–		DVD				CATV


+	Adjusts the TV volume.
TV	Adjusts the TV volume.
VOLUME
–

0 to 9	Selects the TV channels. +10 will function as the ENTER button if
and +10	your TV requires pressing the ENTER button after selecting a
	channel number.
	(with DVD			TV		CATV set to TV only)
	(with DVD					CATV set to TV only)

CANCEL	You can switch input mode (either TV or VIDEO).
CANCEL
	(with	DVD		TV		CATV	set to TV only)
TV/VIDEO		DVD				CATV
TV/VIDEO

CH RETURN	Returns to the previous channel. (only valid for JVC TVs)
10

TV

5Try to operate your TV by pressing POWER.

If your TV turns on or off, you have entered the correct code.

NOTE

¦If there is more than one code listed for your brand of TV, try each one until the correct one is entered.

24

Image 28

Contents XV-D701BK Mises en garde, précautions et indications diverses Introduction Table of contents Playing a scene close-up Checking the total disc timeFeatures Using the instructions Changing the language and soundInstallation of the unit Power cordAvoid high temperatures When you’re awayPreliminary knowledge Names of parts and controls Front panelDisplay window Rear panelRemote control unit Audio Volume button Cancel buttonCATV/SAT Power button DVD/TV/CATV switch 24Preference 1 and 2 and Speaker setting displays see Display informationOn-screen displays Basic operations in on-screen displayDVD on-screen display during playback Parental Lock on-screen display seeVideo CD on-screen display during playback On-screen guide icons To prevent the monitor from burning outAbout invalid operation icon Playable disc types Preliminary knowledge about discsPlayable discs Non-playable discs Disc construction Example audio CD/video CD TrackGetting started Connections Before making any connectionsYellow Video RedWhite Connect Y to Y, PB to PB, PR to PR To connect to an audio amplifier or receiver Connection to an audio amplifier or receiverUnit Red White Audio cable Supplied Amplifier or receiverCenter Subwoofer Front To connect to audio equipment with a digital input WhiteTo connect the power cord Turn on the unitPrecautions for the safe use of batteries To install batteries in the remote control unitPrecaution Power To turn on/off the unitUsing the remote control unit To use the remote control unit for TV operationManufacturer code list Changing the remote control signalManufacturer’s code list Set DVD Catv on the remote control unit to CatvPress and hold Power Then press SET Do not release Keep holding PowerGetting started Basic operations Press Power to turn on your TV Press Power to turn on the unitBefore operation To turn on your TV and the unitInserting and removing discs To insert or remove discsPress Close to close the disc tray Information about the opening displayPlaying back a DVD Video or CD disc To playback a disc from the beginningTo stop playback completely Press StopTo stop playback temporarily To advance or reverse play rapidly while monitoringTo locate the beginning of the scene or song Press Pause7During stop mode Resuming playbackPress Resume Unit starts playback from the stored positionAdjusting the surround sound Press to adjust the effect levelSelected effect mode To simulate the surround sound 3D PhonicHow to use numeric buttons Summary of basic operationsPress Numeric buttons are used to select a track or title numberTo adjust the picture quality VFP To playback a scene close-up ZoomTo select a scene angle from the angle list display To select the subtitle language SubtitlePlaying a specific scene on a DVD disc To locate the desired scene from the menuPress Use to select the desired item, then press EnterWhen is displayed in the TV screen Use 1 to 10 , +10 to select the desired title numberUnit begins playback from the selected title Title you have selected is not contained in the discWhen is displayed in the TV screen in step When the chapter number is incorrect in stepTo return to the regular display To locate the desired scene by specifying the time When appears in the TV screen in step When you make a mistake in step7The unit starts playback from the selected time Use To select When you want to check moreDesired title Playing in slow-motion To display still pictures StrobeTo playback in slow-motion Slow Press Pause , then press SLOW+Playing a scene close-up To playback a scene close-up ZoomPress Zoom Use to move the zoomed-in sceneTo repeat a title or chapter Repeat Repeat playbackUse to move to REPEAT, then press Enter To cancel A-B repeat playback To repeat a desired part A-B RepeatViewing from multiple angles To select a scene angle from the on-screen display AnglePress Angle Press Angle or to select the desired angle Use to move to AngleWhen appears on the TV screen in step Press and hold Angle for more than 1 secondsUse to select desired angle Press Enter Selected angle appears on the TV screenTo select the subtitle language Subtitle Changing the language and soundUse to move to Subtitle To select the desired Use to move Audio Use to select desired audio language or soundTotal number Selected audio numberAdjusting the picture to suit preferences To adjust the picture quality VFPPress VFP or Processor on the front panel By pressing VFP or on the front panelSetting and adjustment Move to select the item you want to set by using Press to select the setting you wantSelecting preferences Press Stop to stop the unitPreference 1 can be set as follows To set the language and display preference itemsSelected language Selected language Japanese = language code from AA toSpanish FrenchOn Screen Guide Preference 2 can be set as follows To set other preference itemsPlayback discs Output L0/R0 Lt/RtAudio is played back as it was recorded Mode Picture is scrolledPicture is not scrolled Picture gets darkAV Compulink Mode Auto standby function is offSpeaker setting When you connect to a 2-channel amplifier, or use 2 speakersBass redirect available only when selecting Expert Speaker size available only when selecting ExpertWoofer Speaker level available only when selecting Expert Delay available only when selecting ExpertTo exit the speaker level or delay setting mode Woofer sub-wooferTest tone available only while setting Level or Delay Select Test Tone using Then pressTo exit the test tone mode Color of Test Tone changesLimiting playback by children To set Parental Lock for the first time Parental LockPress Enter while holding down Stop Use to select the CA for country code and pressTo change the settings Parental Lock New setting is effectiveUse to move to Set Level, then use to select the parental lock levelEnter your 4-digit password using 0 to If you select YES, moves to the Password fieldWhen selecting NO, press Close button to remove the disc To temporarily release the Parental lock Parental LockTo select the time display mode Time Select To playback only the beginning of each track IntroTo locate a desired track using Next or Previous Select a desired track number usingPlaying a specific track on a disc To locate a desired track directlyTo locate a desired position by specifying the time Use 0 to 9 to selectTime minute and second then press Enter Use to move to Time Search and pressWhen you make a mistake in step To playback in the desired order Program Changing the track orderPress Play to start program play Unit can play tracks in random order 7During stop mode To playback tracks in random order RandomUse to move to Random Color of Random changes Random play beginsTo repeat a current track or all tracks Repeat To quit repeat playbackPress Enter at the end Use to move to A-BPart you want to repeat point B Sampling all tracks Use to move to IntroColor of Intro changes To stop Intro scanTo select the time display mode Time Select Use To moveWhat is CD TEXT? Information about CD TextAudio CD operations Video CD operations Playing a specific scene on a Video CD To use the menu of the Video CD recorded on PBCUse Desired number of the itemTo locate a disired track directly During playback without the PBC function or stop modeDuring playback without the PBC function Use to move to Time Search and press Time search function does not work during PBC playback Use to select the desired track When you want to check more Scenes, press . AdditionalUnit begins playback from the selected track Unit play the slowest speed, and each time you press To cancel zoom play Press ZoomYou can program tracks during playback Unit can play tracks in random order 7During stop 7Random play beginsTo stop random play Press StopUse to move to Repeat 7During playback without PBC functionTo cancel A-B repeat To playback only the beginning of each track Intro To stop Intro scan Press StopBy pressing VFP or Processor on Front panel Selected of the picture quality tab lights up in yellowTo change the audio channel Audio Select the audio channels to be played back usingSelected audio channel Checking the total disc time Use to move to Time SelectPress Enter until Total Remain appears on the TV screen Total disc time appears on the TV screenCare and handling of discs Troubleshooting Connection and setupHow to handle discs Maintenance of discsCare and handling of discs Even on label sideTroubleshooting Symptom Possible case RemedyAV Compu Link remote control system Connection and SetupOperation Specifications Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page EN. FR 0299TTMUBNPRI