JVC UXQD90S manual Playback Timer

Page 109

For the locations of remote control buttons, refer to page 46.

13 Press .

•The settings appear in the display window. Confirm the settings.

14 Press to turn off the main unit.

•While the recording timer is functioning, the volume is set to "0" and no sound is pro- duced from the speakers or headphones.

•The recording timer is available only when the main unit is turned off.

NOTE

•During operation, you can return to the previous

step by pressing . You can quit the recording

timer settings by pressing . The settings are not stored.

Canceling the recording timer

In step 2 on page 47, select the timer number you

want to cancel, and then press .

Even when you cancel the recording timer, the set- ting remains stored.

Activating the recording timer again

In step 2 on page 47, select the timer number you

want to activate, and press . Then turn off the main unit.

Confirming the recording timer

In step 2 on page 47, press repeatedly. If you want to quit checking the recording timer, press

.

Changing the recording timer

Set the recording timer again from step 1 on page 47.

NOTE

•When you want to activate two or three recording timers, leave a blank time of 2 or more minutes between the ending time of the first recording timer and the starting time of the second recording timer. If the blank time is less than 2 minutes, the second recording timer does not work.

•When the power plug is disconnected or the power is interrupted, the recording timer settings may be lost. If the settings are lost, set the clock and recording timer again.

Playback Timer

1 Prepare the sound source you want to play back.

Disc

Make sure that a disc is loaded.

 

(

page 22)

 

 

 

 

Cassette

Insert a cassette tape. (

page 42)

tape

 

 

 

Radio

Preset the radio station whose broadcast

 

you want to listen to. (

page 21)

 

 

Other

Follow the operation manual for the

equipment

equipment.

 

2 Press repeatedly to select "TIMER1", "TIMER2" or "TIMER3".

Example: When "TIMER2" is selected

3

Timer number

 

 

Press

.

 

 

4

Press

,

and

to set

the starting time and ending time.

Example: When you want to set the playback time from 7:00 a.m. to 7:30 a.m.

•You can use the number buttons to set the playback time. Refer to "Using the number

buttons" ( page 16).

•For setting the clock, refer to steps 2 to 5 in

"Setting the Clock" ( page 16).

Entering the "hour" → → Entering the "minute" →

5 Press or to select "ONCE" or "WEEKLY".

ONCE

: The playback timer works once.

WEEKLY

: The playback timer works weekly

6 Press

or every day.

.

(Continued on next page)

Convenient Functions

48

Page 108 Page 110
Image 109
Page 108 Page 110
Contents For turning off the demonstration display, refer to UX-QD90SImportant for Laser Products Side view Front viewTable of Contents Connection and Setting Operations Sleep Timer Recording Timer Playback TimerPlayback Basic OperationsSuitable Locations for the Main Unit Cleaning the Main UnitCondensation Listeners EtiquetteRegion code of DVD Video Playable DVD/CD TypesDiscs you can play back Discs that cannot be played backAbout MP3/WMA/JPEG discs Disc StructureMP3/WMA Jpeg discs Special Cautions Supplied AccessoriesBottom view of the main unit Voltage AdjustmentIntroduction/Preparation Remote control operation Remote ControlInserting Batteries into Setting the manufacturers code Operating the TV Using the Remote ControlFor TV operation Press Release Press number buttonsConnecting the AM antenna Connecting the AntennasSet up the AM antenna supplied ConnectionsPreparation Connecting the FM antennaConnecting the Speakers Connecting with a TV Connecting Other EquipmentConnecting with digital equipment Audio cord not suppliedConnecting the Power Plug When a Clearer Picture Is DesiredConnecting by using the S-video cord Connecting by using the component video cordBasic Operations Setting the ClockAdjusting the Sound Quality Adjusting the VolumeTurning On/Off the Main Unit Changing the Display Brightness Dimmer Emphasizing Heavy Bass Sound AHB PROChanging the Color Patterns While the selected system is dis- played, press Press To select the desired SystemListening to Radio Broadcasts Setting the AM Tuner SpacingThis product can receive FM and AM radio broad- casts On the main unit onlyTuning In to a Preset Radio Station Storing Radio Stations PresetSelecting a Radio Station Playback Basic Operations of the DVD PlayerPress on the main unit Place a disc on the disc trayDisplay while a DVD VR is stopped Display while a DVD VR is being played backDisplay while a CD is being played back Display while a CD is stoppedOne Touch Replay Stopping Playback Pausing PlaybackResuming Playback Resume Advancing Picture Frame by FrameSlow Motion Playback Refer to Using the number buttonsSkipping to the Beginning of a Track Set the remote control mode selector to Audio Press or Using the Menu Screen for DVD VRsSelecting a Track from the Menu Screen Press to select the desired titleSelecting the Audio Language Convenient Functions of the DVD PlayerExample For DVD Video Is not pressedSelecting the Subtitle Language Canceling the subtitleSelecting a View Angle Magnifying the Picture ZoomPress To select VFP mode Adjusting the Picture Quality VFPPress to select an item you want to adjust Creating Realistic Sound 3D PhonicGroup Adjusting Playback Level Playing Back the BonusPress the number buttons to enter the pin code 4 digits Select the level while listening to the sound played backPlaying Back the Disc Desired Order Program Playback Browsable Still Pictures B.S.PPress the number buttons or to program chapters Tracks Select a title number, and then select a chapter numberCanceling program playback Confirming programmed contentErasing the whole program While playback is stopped, press Or repeatedlyRandom Playback Canceling random playbackRepeat Playback Press repeatedly to select RandomStatus Bar and Menu Bar Using the Status Bar and Menu BarFunction list Information displayed on the status barPlaying Back the Designated Part Repeatedly Repeat Playback Canceling A-B repeat playbackDesignate the Time Time Search Insert a disc Playing Back MP3/WMA and Jpeg DiscsExample For MP3 Slide-show playback Press to select a group Press to move to the track listPressing returns to the group list Example For MP3 during playbackBasic Operations PreferencesAudio Language Codes Listening to Cassette Tapes Press repeatedly to select the reverse modeInsert a cassette tape Listening to Other Equipment Adjusting the Sound Input Level from Other EquipmentHold down until the input level appears Each time you hold down , the display changes as followsRecording Sound to Cassette Tapes Press to select the reverse modePreventing recorded sound from being erased Insert a cassette tape for record- ingRecording Only One Track from a Disc Quitting RecordingProgram Recording from a Disc Recording with No Blank Time between TracksSleep Timer Using the TimersChanging the sleep timer setting Confirming the sleep timer setting remaining timeRecording Timer Canceling the recording timer Playback TimerActivating the recording timer again Confirming the recording timerWhen Once is selected Press Press or to adjust the playback volumeExample When you want to listen to an AM broadcast Press or to select the desired day of the weekAuto Standby Connection and Setting Using AV Compu LinkCanceling the disc ejection lock Disc Ejection LockHandling Discs/Cassette Tapes Disc Messages TroubleshootingDVD receiver CA-UXQD90S Speaker SP-UXQD90S SpecificationsMicro component DVD system UX-QD90SAC 电路说明 Mains AC Line InstructionMicro Component DVD System Important for Laser Products Front view Side view Addition, maintain the best possible air circulationTable of Contents Connection and Setting Operations Sleep Timer Recording Timer Playback TimerPlayback Basic OperationsSuitable Locations for the Main Unit Cleaning the Main UnitCondensation Listeners EtiquetteRegion code of DVD Video Playable DVD/CD TypesDiscs that cannot be played back About MP3/WMA/JPEG discs Disc StructureMP3/WMA Jpeg discs Special Cautions Supplied AccessoriesFor Saudi Arabia For other countries Bottom view of the main unit42, 44 46 49 17 Cassette holder Inserting Batteries into Setting the manufacturers code Operating the TV Using the Remote ControlFor TV operation Connecting the AM antenna Connecting the AntennasSet up the AM antenna supplied Connect the antenna cordConnecting the FM antenna Connecting the Speakers Connecting with a TV Connecting Other EquipmentConnecting with digital equipment Audio cord not suppliedWhen a Clearer Picture Is Desired Set the day of the week Adjusting the Sound Quality Adjusting the VolumeTurning On/Off the Main Unit Changing the Display Brightness Dimmer Emphasizing Heavy Bass Sound AHB PROChanging the Color Patterns Sober violet colorSelecting the Color System Video Processing System Scan Mode Listening to Radio Broadcasts Stored on the left To Discs Display while a DVD VR is stopped Display while a DVD VR is being played backDisplay while a CD is being played back Display while a CD is stoppedOne Touch Replay Stopping Playback Slow Motion Playback Refer to Using the number buttonsSkipping to the Beginning of a Track Each time you pressSelecting a Track from the Menu Screen Selecting the Audio Language Convenient Functions of the DVD PlayerExample For DVD Video Is not pressedSelecting the Subtitle Language Canceling the subtitleSelecting a View Angle Magnifying the Picture ZoomAdjusting the Picture Quality VFP Group Adjusting Playback Level Playing Back the BonusPress the number buttons to enter the pin code 4 digits Select the level while listening to the sound played backBrowsable Still Pictures B.S.P Set the remote control mode selector to Audio PressPlaying Back the Disc Desired Order Program Playback Press the number buttons or to program chapters TracksConfirming programmed content Random Playback Status Bar and Menu Bar Using the Status Bar and Menu BarFunction list Information displayed on the status barPlaying Back the Designated Part Repeatedly Repeat Playback Canceling A-B repeat playbackDesignate the Time Time Search Playback Playing Back MP3/WMA and Jpeg DiscsInsert a disc Example For MP3Slide-show playback Press to select a group Press to move to the track listPressing returns to the group list Example For MP3 during playbackBasic Operations PreferencesAudio Language Codes Listening to Cassette Tapes Press repeatedly to select the reverse modeInsert a cassette tape Listening to Other Equipment Adjusting the Sound Input Level from Other EquipmentHold down until the input level appears Each time you hold down , the display changes as followsRecording Sound to Cassette Tapes Press to select the reverse modePreventing recorded sound from being erased Insert a cassette tape for record- ingQuitting Recording Sleep Timer Using the TimersChanging the sleep timer setting Confirming the sleep timer setting remaining timeRecording Timer Playback Timer Play Timer Auto Standby Canceling the disc ejection lock Connection and SettingDisc Ejection Lock OperationsHandling Discs/Cassette Tapes Disc Messages TroubleshootingMicro component DVD system UX-QD90S DVD receiver CA-UXQD90SFor Saudi Arabia For other countries
Top Page Image Contents