JVC HR-XVC1UJ manual Inserting Batteries, Battery precautions, Remote control basics

Page 11

 

 

Remote control

Inserting Batteries

 

 

1 Open the battery compart-

2 Install two "AA" batteries (supplied),

3 Replace the compartment

ment cover in the direction of

paying attention to the polarity

cover.

the arrow.

diagram in the battery compartment.

 

Battery precautions

The precautions below should be followed when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

Remote control basics

Press POWER to turn the DVD/VCR on or off.

Make sure TV/VCR/DVD switch is set to VCR/DVD.

Tap VCR CH + or VCR CH to move through the channels one channel at a time.

The VCR CH +/–and SET +/–are also used to navigate on-screen menu system.

You can directly access specific channels using Number keys pad.

Each press of VCR or DVD, switches the screen between the VCR screen (VCR mode) and the DVD screen (DVD mode).

Operation

 

• Aim the remote control at the remote sensor and press control buttons

 

to operate.

 

• Operate the remote control within 30° angle on either side of the remote

Approx. 5 meters

sensor, up to a distance of Approx. 5 meters.

 

Change the custom code for remote control

If you operate this DVD/VCR with another JVC’s VCR simultaneously arranging them side by side, the both recorders will react to this remote control. In this case, you can change the remote control and DVD/VCR to other frequency (“ ”). Then you can operate only this DVD/VCR with this changed remote control.

When you purchased, the DVD/VCR and remote control have been set to the frequency-“ ”.

Example: Change frequency to

Remote control:

While holding VCR, press 2(code: b) of Number keys. (in case of code: A, press 1)

TV VCR

DVD MENU

MARKER

DVD

POWER

RETURN

OPEN/

CLOSE

 

SUB TITLE

ANGLE

SEARCH

 

MODE

SP/EP

 

 

 

PLAY

ZOOM

TITLE

REPEAT

MODE

A-B

TV

POWER

INPUT

 

 

TV VOL

0

TIMER

TV/VCR

DVD/VCR:

In the POWER off mode,

press and hold PLAY for more than 5 seconds. “b”

will appear on the display

OPEN/CLOSE

REW FF

REC DVD

 

 

PLAY STOP

 

and then disappear after

 

 

 

approx. 4 seconds.

 

 

 

NOTE:

If the remote control has been set to b, the DVD/VCR also must be set to b. Otherwise, the DVD/VCR can not be operated with this remote control.

To reset to “A”, repeat above procedure. However press 1 instead of 2.

11

Image 11
Contents Hi-Fi Power System Video heads cleaning How to use the RemotePage Page DVD Section FeaturesDVD/CD Player/Video Cassette Recorder VCR SectionContents Rear Parts and functionsFront Display window Explanation for On-Screen-SymbolDisplay JVC TV Remote Control Remote controlChange the custom code for remote control Remote controlBattery precautions Remote control basicsSeparate VHF and UHF Antennas Basic connectionsCombination VHF/UHF Antenna with 75 ohm Coaxial Cable Ohm Coaxial Cable supplied Splitter Basic connectionsDescrambler Catv Cable TV connectionsIncoming Cable ConverterSplitter Descrambler Incoming Converter CableDescrambler SwitchCatv Cable TV connections Cable DescramblerConnect to a BS Tuner Playback ConnectionConnect to a TV with Audio/Video Output Connect to a TV with S-Video OutputConnect to an AV Amplifier with built-in digital surround Connecting the optical digital cablePlayback Connection Connect to a Stereo Amplifier with Audio OutputEnter Setting the Video Channel / Setting the languageSetting the Video Channel Setting the languagePreparation Tuner SettingSetting channels automatically TV/CATV SelectionNoise elimination To ADD/DELETE channels / Noise eliminationTo ADD/DELETE channels Press To select your Time Auto clock settingStandard Time option, then Press EnterDaylight saving time setting Auto clock settingTo make corrections any time during the process Manual clock settingLoading and Unloading a Cassette Tape To rewind the tape or forward it rapidly Forward/Reverse picture search modeCassette tape Playback To stop playbackSpecial playback DISPLAY-button Zero Return function / Video Index Search systemZero Return function Video Index Search systemAppear on the display Recording a TV programRecording and viewing the same TV program Recording a TV program Press Number keys or VCR CH +/-to Instant Timer Recording ITRTo cancel ITR Through Timer RecordingTo return to the normal screen Press Setup Menu twice To enter other programs, repeat stepCase Timer programs-overlap Timer-RecordingTimer Recording Special case Confirmation / Cancellation of the Timer RecordingListening to SAP Stereo Recording and PlaybackSeparate Audio Program SAP Output selectionConnection with Video camera Duplicating a video tapeDuplicating a disc material onto a video tape Connection with second Video recorderDisc Setup language can be selected Setting setup languagePress OPEN/CLOSE Playback procedureFrame Advance Fast Forward PlaybackReview Playback Still PlaybackLocating Desired Scene Zooming / Locating Desired SceneZooming Title, Chapter, Track Playback Press Play Mode during playback or stop modeRepeat playback You can arrange the order of tracks on the disc Program playback/Random playback CDProgram playback Random playbackLimitations on display MP3 PlaybackMP3 CD Information Limitations on MP3 CD playbackReturning to the Scenes To Cancel the MarkMarking Desired Scenes Marking the ScenesCase of Video CD playback Changing soundtrack language / SubtitlesChanging soundtrack language Turning the Subtitles On and OffDVD Menu Changing angles / Title selection / DVD menuChanging Angles Title SelectionParental control Parental control settingTo unlock the Parental Control Setting CancelTemporary disabling of rating level by DVD disc English, Francais, Espanol Setting menu languageAutomatic Setting subtitle languageMode Press To select Language OtherTo cancel Surround mode Setting audio soundtrack languageSetting surround sound Power offPAN Scan Setting the aspect ratio of TV screenYou can select the aspect ratio for your TV Preparation Press ENTER, then press or to select Tv Screen Press EnterDVD Video CD Setting on Screen display / Status display of DiscSetup Menu in the stop Status display of DiscLanguage Code List DVD Problems and troubleshootingSymptoms Possible Solutions DVD/VCR VCRSymptoms Possible Solutions Problems and troubleshooting / Video head cleaningVideo head cleaning Auto Clock SettingVCR section SpecificationsAccessories General

HR-XVC1UJ specifications

The JVC HR-XVC1UJ is a versatile and innovative device that combines the functionality of a VCR and a DVD player into one sleek chassis. This unit is designed for those who appreciate the nostalgia of VHS tapes while also wanting the convenience and clarity of DVDs. The HR-XVC1UJ serves as a bridge between old and new technologies, making it an attractive choice for home entertainment enthusiasts.

One of the standout features of the HR-XVC1UJ is its ability to play and record both VHS and DVD formats. This dual functionality allows users to watch their favorite movies from both formats without the need for multiple devices. With its integrated video cassette recorder, users can still enjoy their cherished VHS collections while taking advantage of the advanced playback options available with DVDs.

The device supports a variety of recording modes with VHS, giving the user flexibility in terms of recording time and quality. It features standard play, long play, and extended play modes, allowing users to choose the balance between recording time and picture quality according to their needs.

Another significant aspect of the JVC HR-XVC1UJ is its user-friendly interface, which guides users through setup and playback with ease. The inclusion of a remote control enhances this experience, allowing users to navigate through tapes and discs conveniently.

The HR-XVC1UJ is also equipped with various connectivity options, including composite video and audio outputs, making it compatible with traditional televisions. This feature ensures that even older TV models can benefit from the capabilities of this hybrid device. It also includes an S-Video output for those who wish to enhance their video quality further.

Additionally, the JVC HR-XVC1UJ boasts advanced technologies like "Adaptive Picture Control," which optimizes the picture quality based on the content being played, providing a clearer and more engaging viewing experience. The integrated timer function allows users to schedule recordings, ensuring they never miss their favorite shows or movies.

In conclusion, the JVC HR-XVC1UJ stands out as a multifunctional device that caters to both contemporary and nostalgic viewing preferences. With its combination of VHS and DVD playback, user-friendly controls, and various connectivity options, it is an excellent addition to any home entertainment system, making it easy to enjoy the best of both worlds.