JVC GNT0013-014A manual LASERCLASS1PRODUCT

Page 2

Warnings, Cautions and Others

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

Caution –– switch!

Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The

power can be remote controlled.

Caution: Proper Ventilation

To avoide risk of electric shock and fire and to protect from damage.

Locate the apparatus as follows:

Front:

No obstructions and open spacing.

Sides:

No obstructions in 3 cm from the sides.

Top:

No obstructions in 5 cm from the top.

Back:

No obstructions in 15 cm from the back

Bottom:

No obstructions, place on the level surface.

CAUTION

Spacing 15 cm or more

Front

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be consid-ered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Wall or

obstructions

XV-S402SL/XV-S332SL

Stand height 5 cm or more

Floor

IMPORTANT FOR ASER PRODUCTS

REPRODUCTION OF B LS

1 CLASSIFICATION B L, PLACED ON REAR ENCLOSURE

LASERCLASS1PRODUCT

2WARNING LABEL, PLACED INSIDE THE UNIT

CAUTION: Invisible

laser

 

VARNING: Osynlig

laser-

 

ADVARSEL: Usynlig laser-

 

VARO: Avattaessa ja suo-

radiation when open

and

 

strålning när denna

del är

 

stråling ved åbning,

når

 

jalukitus

ohitettaessa

olet

interlock failed or defeated.

 

öppnad och

spärren

är

 

sikkerhedsafbrydere er

ude

 

alttiina

näkymättömälle

AVOID DIRECT EXPOSURE

 

urkopplad.

Betrakta

ej

 

af funktion. Undgå udsæt-

 

lasersäteilylle. Älä

katso

TO BEAM.

(e)

 

strålen.

 

 

(s)

 

telse for stråling

(d)

 

säteeseen.

(f)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.CLASS 1 LASER PRODUCT

2.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

Image 2
Contents RU966 RU966/2QO\LASERCLASS1PRODUCT Table of Contents Introduction FeaturesSupplied accessories To playback in random order Random To stop/quit random playback in the middleSafety precautions Important cautionsFront panel Preliminary knowledgeNames of parts and controls For XV-S402SLRemote control unit Previous button 24, 25, 27 # Infrared signal-emitting windowChoice button Clear button 24, 32, 4210 0 +10 = 3D Phonic button Infrared signal-emitting windowNumeric buttons $ Menu buttonDisplay window Disc indicatorPROGRAM/RANDOM indicators Multi-information windowRear panel Opening displays Operational PrinciplesOn-screen displays Preference displaysStatus displays Play mode displaysTo prevent the monitor from burning out Screen Saver During Audio CD/MP3 CD During Video CD/SVCD PlaybackAbout invalid operation icon How to use numeric buttonsOn-screen guide icons To select a track/title numberDisc structure About discsPlayable disc types Playable discsBefore making any connections Getting startedConnections To connect to a TVEnabling the Component Video OUT To connect to a TV with the component video input jacksSelecting the Color System Blue Green Red Component video cable Not supplied UnitAudio cable To connect to an audio amplifier or receiverTo connect to audio equipment with a digital input To connect the power cord Precautions To install batteries in the remote control unitPrecautions for the safe use of batteries Set TV-DVD switch to TV position Setting the remote control signal for operating your TVYou can operate your TV from the remote control unit Manufacturer code listSelects the TV channels directly Switches the TV input mode between TV and VideoTurns the TV on or off Channel numberInserting and removing discs Basic operationsTurning on/off the unit Press 0 OPEN/CLOSE to close the disc trayTo stop playback completely Basic playbackTo start playback To stop playback temporarilyTo memorize the interrupted position Resuming playbackTo locate the beginning of the scene or song To resume playbackTo locate a desired scene from the DVD menu Advanced operationsPlaying from a specific position on a disc Press TOP Menu or MenuFor DVD Video During playback To locate a desired selection using 4 or ¢Use the numeric buttons to specify the number Press Enter Press Play ModeUse Cursor 2/3 to move To Chap SEARCH, then press Enter Press Digest To locate a desired scene from the display DigestUse the numeric buttons 0 to 9 to enter the time Use Cursor 5/∞/2/3 to select the desired scene Special picture playbackTo display continuous still pictures Strobe Press and hold 8 for more than 1 secondPress 8, then use 1 / ¡ To playback in slow-motion SlowTo zoom a scene Zoom Press ZoomUse Cursor 2/3 to move to Program and press Enter Changing the playback orderTo playback in the desired order Program Press 3 to start program playTo repeat the current selection or all tracks Repeat Repeat playbackTo playback in random order Random Use Cursor 2/3 to move to RandomAudio CD/Video CD/SVCD For Audio CD For Video CD/SVCD Make sure that the Repeat mode is off. If anyTo repeat a desired part A-B Repeat To quit repeat playbackPress Angle Selecting a scene angleTo select a scene angle from the normal screen Angle Use Angle or Cursor 2/3 to select the desired angleTo turn the subtitle on and off, press To select a scene angle from the angle list display AnglePress Subtitle For DVD VideoUse Audio or Cursor 2/3 to select the desired audio To change the audio language or sound AudioPress Audio To select the picture character Selecting the picture characterEnjoying virtual surround sound To simulate surround sound 3D PhonicTo turn off the disc/time display Press Display Checking the statusTo check the disc/time information Dimning brightness of the display window To dim the brightness of the display windowTo check the DVD function status Press DisplayAbout MP3 CD disc Basic operations using the basic control buttonsMP3 CD playback Unavailable functionsAdvanced functions Track/Group selection using the numeric buttonsHow to select a Track or Group Program playbackWindow on the front panel. After playing all groups Random playbackYou can playback Groups on an MP3 CD disc in random order Disc, random playback endsDisc/time information To turn off the play mode menu display Press Play ModeRepeat playback You can repeat playback of the current Group or all GroupsSelecting preferences Initial settingsHow to set preferences LanguageAudio Display System Limiting playback by children To set Parental Lock for the first timeScreen display appears To change the settings Parental LockPress Enter while holding down 7 on the remote control unit On the TV screenWhen you enter the wrong password more than 3 times Moves to Password fieldWhen selecting no Press OPEN/CLOSEAdditional information AV Compu Link remote control systemConnection and setup For XV-S402SL onlyWhen you connect the component video output to your TV OperationCare and handling of discs How to handle discsMaintenance of discs Label sideTroubleshooting Symptom Possible case RemedySpecifications Appendix ATable of languages and their abbreviationsAppendix BCountry/Area code list for parental lock JVC 0402MZMCREJSC