JVC CU-VS100U Troubleshooting, Player wont turn on Player wont work Screen freezes during

Page 15

Troubleshooting

Before you request repairs, check the items in the table below once more.

If there is still a problem, contact the store where you purchased this product or your nearest JVC service outlet.

If the player is malfunctioning, reset the player.

1.Turn the player off by pressing and holding power () on the player for at least 10 seconds.

2.Press the power () to turn the player back on.

EN

FR

CA

General

Problem

The player won't turn on.

The player won't work.

The screen freezes during

SETUP.

The player or its power cable is warm.

There is no image on the TV.

Solution

Ensure that you are using the special power cable provided and that it is connected cor- rectly. (P.6)

Press and hold power () on the player for at least 10 seconds to reset the player. (The player automatically turns off.)

If used for an extended period, the player and its power cable become warm. This is normal and does not indicate a fault.

If the player or power cable becomes abnormally hot, disconnect the power cable and con- tact the store where you purchased this product or your nearest JVC service outlet.

Connect the player to the TV. (P.6)

On a TV equipped with A/V input jacks, switch to the external input for the connection with the player.

The content type is not supported by the player and is not recognized.

Review the resolution setting. (P.13)

● Press and hold the player's power ( ) and SKIP

 

for at least 2 seconds to reset the

 

player. (The player automatically turns off.)

 

 

中文

PT

Playback

It takes a time to start playing.

The image is disrupted during reverse or fast- forward playback.

The TV switches input automati- cally when the player is played.

The TV turns off when this player is turned off.

This player functions when the TV’s remote control is being operated.

It may take some more time to start playing long recorded movies or large sized images.

The image may become disrupted during the change in playback speed when you switch speeds. This is normal and does not indicate a fault.

This is caused by the operation of the HDMI-CEC control function. To disable this function, set "HDMI control" to "Off" in the SETUP menu. (P.13)

15

Image 15
Contents HD Media Player CU-VS100UFor owners in Canada Dear CustomerFor USA-California Only For owners in the U.S.AImportant Safety Instructions Player front panel Remote controlUsing the remote control correctly Component Names and FunctionsPull out insulating sheet Lithium battery CR2025 Remote Control ButtonsHdmi input Hdmi cable optional Connecting to a TVConnecting the player to a TV equipped with AV input jacks Player rear panelSelecting files and folders choosing movies and photos Using the folder listBasic Operation Playback from an SD cardContent Menu Switching the file list display format Setting the interval for photo slideshowsSimultaneously playback of photos and music files Copying... message screen appears Press Return when you want to cancel the commandCopying SD Cards PreparationCopying all the files All copy Copying selected files Select copyCopying photos DCF-format Times Folders and Files on an SD CardConfiguring the Player Settings Hdmi Linked Operation with a TV Turn the player back on by pressing the power buttonPlayer wont turn on Player wont work Screen freezes during TroubleshootingMessage displayed JVC accepts no liability whatsoever for any loss of data CondensationSpecifications Displaying PhotosFormat File extension Format restrictions Jpg or jpeg Maximum resolution SeeUsed. We suggest using the recommended SD cards Playback Formatting