JVC XV-N50BK manual Viewing pictures continuously slide show mode, To zoom in the picture

JPEG disc playback

Numeric buttons

TITLE/GROUP

5/∞/2/3

4 ¢

7 8

3(SELECT)ZOOM

REPEAT

NOTES

	• The player supports the baseline JPEG format.
	• The player does not support “packet writing (UDF format)”
	discs.
	• The player supports discs recorded with multiple sessions.
	• The player may not be able to read some discs, or may take a
	long time to display a picture on the disc, due to disc
	characteristics, recording conditions, or numbers of groups
	(folders), etc.
	• Programmed and random playback functions do not work with
	JPEG discs.
	• The screen saver function will be activated if the same picture is
	displayed for more than 5 minutes except during slide show
	playback.
	• The player only can play back files with the following file
	extensions; “.jpg,” “.jpeg,” “.JPG,” “.JPEG” and any other
	combination of upper case and lower case letters (such as
	“Jpg”).
	• If a JPEG file name includes any 2-byte character, the player
discJPEG playback	may not show the file name correctly.
	• If a picture has been saved at greater than 640 x 480 pixel
	resolution, it may take some time to display the picture.
	• The player does not support pixel size picture of more than
	2400 pixels. Make sure that the picture pixel size is 2400 pixels
	or less.

To zoom in the picture

1 While in pause mode, press ZOOM.

Pressing ZOOM causes the player to zoom in on the image. Each time you press ZOOM, the manginication is doubled (1.8, 4, 8, 16, 32 and 64 times).

2 Press 5/∞/2/3 to move the zoomed position.

Viewing pictures continuously (slide show mode)

You can see files (still pictures) one after another automatically.

To start the slide show

Press 3 (SELECT).

The slide show starts from the beginning of the disc. Each file (still picture) is displayed for approximately 3 seconds.

To stop slide show playback in the middle

Press 7 or MENU.

The TV screen returns to the JPEG CONTROL display. Pressing 3 (SELECT) resumes slide show playback from the last picture displayed.

To keep showing the current picture

Press 8 or ENTER.

Pressing 3 (SELECT) resumes the slide show playback.

To select the start point of the slide show

From the JPEG CONTROL display

1 Make sure that the black (cursor) bar is in the left (group) column.

If it is in the right column, press 2 to move it to the left column.

2 Press 5/∞ to move the bar to a desired group.

3 Press 4/¢ to select a desired file.

4 Press 3 (SELECT).

The slide show starts from the specified file.

Direct selection

1 During playback or while stopped, press

TITLE/GROUP.

2 Press the numeric buttons to specify a desired group number.

To select 5: press 5.

To select 23: press +10, +10, then 3.

To select 40: press +10, +10, +10, then 10.

3 Press the numeric buttons to specify a desired file number.

The player starts slide show playback from the specified file. If you do not specify a file, the player starts slide show playback from the first file in the group.

24