Timer Recording with
SHOWVIEW® System
This system makes programming timer recordings very simple. Most TV guides publish SHOWVIEW programming numbers with their program details.If you want to make a timer recording of a program, you just input the corresponding SHOWVIEW programming number. The date, start, stop and channel settings are made automatically. All you have to do is tell the recorder the recording mode, and whether it’s a once- only recording, or a regular recording.
Up to 16 timer programs can be stored in the recorder.
SHOWVIEW is a registered trademarks of Gemstar Development Corporation.
The SHOWVIEW System is manufactured under license from Gemstar Development Corporation.
1.Press SHOWVIEW button.
The SHOWVIEW menu will appear.
Press SHOWVIEW button again to exit the menu.
[Number] Enter the SHOWVIEW programming number.
2.Use the number buttons then press ENTER to enter the SHOWVIEW programming number.
To check the programming, the Timer Record menu will appear.
If you make a mistake before pressing ENTER, press CLEAR repeatedly to delete number one by one then correct it.
3.You can change the information as required using b / B / v / V (Media, VPS/PDC, etc.)
Refer to “Timer Recording” on previous page.
4.Choose a record mode (XP, SP, LP, or EP).
5.Press ENTER, the program will be memorized by the recorder.
To check the programming, the Timer Record List will appear.
Check field’s “Rec. OK” on the Timer Record List indicates that the timer recording is programmed correctly.
6.Press RETURN (O) to exit the Timer Record menu.
7.Make sure that you load a recordable disc for DVD recording and press STANDBY/ON to switch your unit to Standby.
Notes:
Timer recordings cannot be made if the recorder is turned on.
Even if the timer is set and if the recorder is turned on, the caution message appears on the TV screen before 10, 5, and 1 mimutes from starting time.
You cannot change the operation mode to DVD from HDD (to HDD from DVD) in timer recording. You cannot use the Timeshift function in timer recording.
TV channels cannot be changed in timer recording. You can stop a timer recording in progress.
Press STOP and the confirm message will appear. Press ENTER to stop the recording or
press RETURN (O) to continue the recording. When the end time of one recording and start time of another are the same, the other recording’s start portion will be cut off. So, set the end time of the first program to a few minutes early.
38