JVC BC50R user manual Sleep Timer, Add Channel, Delete Channel, Partial Scan Channels

Adjusting the Menu Settings

Partial Scan Channels
You can partially scan for network signal within a specified range				of channels.
1	Press MENU.
2	Press	or	to select “Partial Channel Scan”, then press	or OK.
3	Press	or	to select “Scan Mode”, then press or OK.
4	Press	or	to select an option, then press OK.
	t “Analog/Digital”: scan for both analog and digital channels
	t “Analog”: scan for analog channels
	t “Digital”: scan for digital channels
5	Press	or	to select “From Channel”, then enter a starting channel range.
6	Press	or	to select “To Channel”, then enter an ending channel range.
7	Press	or	to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.

Add Channel

New channels may be added to your area periodically. Use the Add Channel function to add new channels.

1	Press MENU.
2	Press	or	to select “Channel”, then press	or OK.
3	Press	or	to select “Find Channel”, then press or OK.
4	Press	or	to select “Enter Channel”, then enter a channel.
5	Press	to select “Add Channel”, then press OK.
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1	Press MENU.
2	Press	or	to select “Channel”, then press	or OK.
3	Press	or	to select “Channel Management”, then press or OK.
4	Press	or	, then press OK to mark the channels that you want to remove from the Channel List.
5	Press RETURN to close the menu screen.

Sleep Timer

Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.

ENGLISH

33