JVC AV-32X4BA manual Link Functions

Setting up your TV

6	Press the abutton to display the
			T-V LINK FUNCTIONS
	TT--VVLINKLINK menu
				When a T-V LINK compatible VCR is
	DOWNLOADTV VCR
				connected to the EXT-2 Terminal on the TV,
	TV	BACKOK		it is easier to set up the VCR and to view
				videos. T-V LINK uses the following
	D0005-EN	EXIT		features:
				To use T-V LINK functions:
				A T-V LINK compatible VCR is necessary.
7	If you do not have a T-V LINK			The VCR must be connected to the EXT-2
	compatible VCR connected:			terminal on the TV by a fully wired SCART
	Press the bbutton to exit the T-V LINK			cable.
	menu.
				A “T-V LINK compatible VCR” means a
	The T-V LINK menu disappears.
				JVC VCR with the T-V LINK logo or a VCR
	If you have a T-V LINK compatible
				with one of the following logos. However,
	VCR connected to the EXT-2			these VCRs may support some or all of the
	terminal:			features described below. For details, refer to
	Follow the operating procedure			your VCR instruction manual.
	“Downloading the data to VCR” on			“Q-LINK” (a trademark of Panasonic
	page 37 to transmit the Programme			Corporation)
	number (PR) data.			“Data Logic” (a trademark of Metz
Now, the initial settings are complete,				Corporation)
and you can watch the TV				“Easy Link” (a trademark of Phillips
•	When your TV can detect the TV channel			Corporation)
	name from the TV channel broadcast			“Megalogic” (a trademark of Grundig
	signal, it automatically registers the TV			Corporation)
	channel name (ID) to the Programme			“SMARTLINK” (a trademark of Sony
	number (PR) in which the TV channel has			Corporation)

been registered.

•If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function. For details, see “EDIT/ MANUAL” on page 31.

•The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV), manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 31.

6