Button functions, Playback / Record, etc

Using the search code function

This function searches through the codes one by one, beginning from the ﬁrst code in the list.

1.Turn on the device manually.

2.Switch the remote control mode that matches your device.

Press to select the mode.

3.Activate the search code function.

Hold down and until the mode indicator blinks.

4.Point the remote control at your device and press .

If there is no response, try the next code by pressing } and

press again. Repeat the process until your device turns off.

5.Press to register the code.

The code is now set. Conﬁrm that the mode indicator goes out.

■If your TV’s remote control still does not work even after using the search code function, use your device’s own remote control. The TV’s remote control is not guaranteed to work with all models, brands or operations.

Button functions

■ Change the remote control mode

■ Turn on/off the device

■Navigate the menus

Select		Display menu
OK
Display top		Back to previous
menu		menu
■ Playback / Record, etc.
Select a chapter
Rewind		Forward
Record	Stop Play	Pause

■Mute ➡ Press “”

■Volume ➡ Press “”

■	Select a surround mode ➡ Press “ ”
•	Depending on your device, some functions may
	not be operable with this remote control.

Using the search code function

Button functions

■ Playback / Record, etc.

■Mute ➡ Press “”

■Volume ➡ Press “”

Select a surround mode ➡ Press “ ”