JVC 0610GLT-NF-MT, GGT0353-001A-H Viewing Teletext, Watching Video or DVDs, Troubleshooting

Useful functions (continued)

Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.

Off	: Deactivates the function
Eco-1	: Picture is darkened for the 1st level.
Eco-2	: Picture is darkened for the 2nd level (more than the 1st level).

Max-Eco :Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house works at the same time).

-After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.

-When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.

-After unplugging the TV or press “Power off” button, this function will be reset back to “Off”

Viewing Teletext

You can watch the Teletext broadcast channel with Text Functions.

1 TV mode <--> TEXT mode

2 Select a Teletext page by press number button (0-9).

• Move up or down a page by CHANNEL +/-.

List Mode : Book mark your favourite page.

MODE	(Red) (Green) (Yellow) (Blue)	for select to save
	Press number button
	for enter the number	save
	of page.

	• Recall your favourite page by press the colour button.
Hold	: Hold the current page.
	• Cancel by press this button again.
Reveal	: Display hidden information.
	• example : answer to a quiz, etc
Size	: Double the size of the displayed text.
Index	: Returns to page “100” or a previously designated page.
Cancel	: Leave the current page open, while you switch to watch TV.
	• Useful when running a page search.
Sub-page	: Display the number of Sub-page.
	• Cancel by press this button again.

Watching Video or DVDs

1 Select the input source.

		AV Select		1.	Select
466)	$%/	0	01
		1	Video-1
				OK
		2	Video-2
		3	HDMI	2.	Set
		4	PC

• Operate the connected device and play video.

2 Select “Set Up” Menu.

HDMI setting	: Setting for HDMI input.
Size	: Auto / 1 / 2
	If wrong screen size appears in 480p (525p),
	change to “1” or “2”.
Audio	: Auto / Digital / Analogue
	If no sound, change to “ Analogue “ or “ Digital”.
PC Setting	: Setting for PC input.
Auto	: Automatic adjust by 2.
PC Position	: Adjust screen position by 3 / 4.
	And set by OK .
Phase	: Sets the focus of screen.
Pixel	: Adjusts the horizontal feature of screen.

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Severe noise or snow

Check the aerial cable and TV connections .

Check the direction of the aerial.

Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reflection from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly.

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries.

Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again.

Side control buttons do not work

Switch “Child Lock” to “Off”.

Aspect ratio changed unintentionally

Press “ ZOOM ” button to return to your settings.

PC screen alignment is off

Adjust the “PC Position” in “PC Setting” of Set Up menu.

Blue screen appears on the screen

Switch “Blue Back” to “Off”.

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Poor picture quality

Unnatural colour >> Adjust “Colour” and “Backlight”.

Check “Colour System”. If “Auto” is selected. Select the specific colour system manually.

Poor sound

Adjust the “Bass” and “Treble”.

If receiving a poor signal in “Stereo/I■II” switch to “Mono”. Adjust the channel reception using “Manual”.

For HDMI signal, wrong screen size.

Switch “Size” in “HDMI Setting” to “1” or “2”.

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an “HDMI” device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI.

Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or “Analogue” or “Auto” for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use fine dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUTPUT terminal.

Subwoofer, No sound

May be signal source is not low frequency bass signal.

Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers.

Echo

Lower the sound level in “Microphone Volume” in order to prevent the echo.

5