Remote Control Functions
SLEEP
SELECT
SLEEP
Allows you to choose how long the TV will stay on before turning off.
Notes:
•You can change the interval by pressing the π† buttons and press OK.
•You can set the interval at 0, 15, 30, 45, 60, 90, 120 and 180 minutes.
•60 seconds before the TV turns off, a message will appear and it will count the remaining time. If you want to extend the time, press the SLEEP button and you can change the interval. If you don’t press the SLEEP button, within 60 seconds the TV will turn off.
ML/MTSML/MTS
Allows you to listen to a program in stereo, mono sound or another language (SAP) if available. First you must set the MODE to TV on your remote.
Notes:
•When you are receiving a digital broadcast, if there are other languages, you can change the language by pressing the ML/MTS button.
•Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo mode even if a certain broadcast is in mono sound only.
•Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
•MTS is unavailable if your television’s Input source is (V1, V2, V3, V4, V5).
•ML/MTS will not work when you are using HDMI or an external input.
SWAP S
SWAP
You can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the SWAP button. At first, select TV mode to use the SWAP function.
Notes:
• It will only work in TWIN mode.
SELECT
SELECT
With SELECT, you can select the picture (channel) while viewing split screen. When you press SELECT button, the channel banner on the top will be highlighted. Each press of SELECT will shift the channel. The sound outputs from the screen you have selected.
23