Runco VHD-4402 manual Remote Control Description

FRONT AND REAR PANEL DESCRIPTIONS

Remote Control Description

A.	LED
	Lights when a button is pressed indicating IR output.
B. POWER BUTTON
	Turns the unit on. The MAIN POWER switch on the rear of the unit must
	be on first for this button to be active.
C.	UP BUTTON
	When no menu is present on-screen, this button will toggle you through
	the different aspect ratios.
	When the menu is on-screen, the up button will move the cursor up within
	a menu.
D.	LEFT BUTTON
	When no menu is present on-screen, this button will toggle you through the

AB

C			PWR
				G
	I		I
D	N	M	N	F
	P		P
	U		U
	T		T
I				H
E

	four different sources, in the order of:
		COMPOSITE	S-VIDEO		COMPONENT		PASS THROUGH
	When an adjustment function has been selected (i.e. Brightness), the
	LEFT button will decrease the value of that function.
E.	DOWN BUTTON
	When no menu is present on-screen, this button will toggle you through
	the different aspect ratios.
	When the menu is on-screen, the down button will move the cursor down
	within a menu.
F.	RIGHT BUTTON
	When no menu is present on-screen, this button will toggle you through
	the four different sources, in the order of:
		PASS THROUGH		COMPONENT		S-VIDEO		COMPOSITE
	When an adjustment function has been selected (i.e. Brightness), the
	RIGHT button will increase the value of that function.

1

4

7

OFF

ON

2 3

5 6

89

RUNCO

J

G. MENU BUTTON
	The MENU button brings up the main adjustment menu. After making
	adjustments, the MENU button will bring you back to the sub-menu, then
	the main menu. The Menu will then either time-out after approximately 10
	seconds, or pressing the MENU button will remove the menu immediately.
H.	ENTER BUTTON
	When an item is highlighted on the On-Screen Display, the ENTER button
	will select the item.
I.	PROGRAM BUTTON

Reprogramming of the remote control with lost memory.

J.DIRECT ACCESS BUTTONS

These buttons are a shortcut that allow you to go directly to a particular source of Aspect Ratio, as well as provide discreet ON/OFF commands. These buttons are:

1.Composite Video Source Selection

2.S-Video Source Selection

3.Component Video Source Selection

4.Not used

5.Pass-Through

6.Not used

7.Anamorphic Aspect Ratio Selection

8.4:3 Aspect Ratio Selection

9.Letterbox Aspect Ratio Selection ON: Discreet ON Command

OFF: Discreet OFF Command

10