Troubleshooting
Refer to the table below to check the condition. If you think that there is a problem, contact the JVC Service Center where you purchased the television.
PROBLEMS | CHECK |
|
There is no power | • See if the power cord became unplugged. |
|
| • Check for a blown fuse or circuit breaker or a power outage. |
|
|
|
|
There is no picture | • The antenna could be disconnected. |
|
or sound | • The input mode could be set improperly. See page 59. |
|
| • The tuner (Auto Tuner Setup) could be set improperly. See page 33. |
|
| • The TV station may be having difficulties. Check to see if other stations are working. |
|
|
|
|
Remote control is not | • Check to see that the batteries are still working and properly installed. |
|
operating properly or | • Make sure the remote has a clear sight path to the TV. |
|
at all | • Check that the TV/CATV switch is in the proper position. |
|
| • You may be too far from the TV. You must be within 23 feet (7 meters). |
|
|
|
|
You cannot select a | • Make sure the channels have been programmed. See "Channel Summary", page 33. |
|
certain channel | • Check to see if the channel is locked. See "Channel Summary - Lock" page 34. |
|
|
|
|
The power turns off | • Make sure the set did not become unplugged. |
|
by itself | • Perhaps the On/Off Timer is set. See page 56. |
|
| • Check to see if the Sleep Timer was set. See page 61. |
|
|
|
|
It does not operate | • This television is operated by a microprocessor. It is possible that external noise or |
|
correctly | interference is causing the problem. If the television does not function correctly, remove the |
|
| electrical plug from the wall outlet and wait a while before inserting it into the wall outlet |
|
| again and operating the television. |
|
|
|
|
The clock is wrong | • The power was interrupted and the clock was not reset. See page 55. |
|
|
|
|
The color quality | • Tint and Color may be improperly adjusted. See page 50. |
|
is poor | • The Video Status mode may be turned to the wrong setting. See page 61. |
|
|
|
|
There are lines | • There could be interference from another electrical appliance, such as a computer, |
|
across the picture | another TV or VCR. Move any such appliances further away from the TV. |
|
|
|
|
The picture is spotted | • There could be interference from a |
|
| operating nearby. Move the antenna away from the appliance or change to a coaxial |
|
| cable connection which is less prone to interference. |
|
|
|
|
There are double | • A building or passing airplane can reflect the original signal and produce a second, |
|
pictures (ghosts) | slightly delayed one. Adjust your antenna position. |
|
|
|
|
Picture is snowy | • Your antenna may be damaged, disconnected or turned. Check the antenna |
|
(image noise) | connection. If the antenna is damaged, replace it. |
|
|
|
|
Screen is 80% black | • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 43. |
|
|
|
|
Stereo or bilingual | • Make sure the MTS settings are correct. See page 54. |
|
programs can't be |
|
|
heard |
|
|
|
|
|
67