Technical information

PC Signals that can be displayed

•If the signal doesnʼt appear, check that the vertical frequency on the PC is set to “60Hz”.

Resolution	640 x 480(VGA) / 1024 x 768(XGA)

Vertical frequency (Hz)	60.0

What is “Clear SD”

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

Connect “DVI” devices

Connect a “DVI” device to “HDMI-1” using “DVI-HDMI” conversion cable. Connect analogue sound output of the DVI device to L and R terminals in IN HDMI-1.

•Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)

•HDMI-2 input does not support analogue sound (IN HDMI-1).

•HDMI-2 input does not support DVI devices.

No use "Clear SD"

Use "Clear SD"