JVC JLC37BC3002, JLC47BC3002 Channel Menu, Select Antenna / Cable, Auto Scan Channels

Adjusting the Menu Settings

Channel Menu

Select Antenna / Cable

Select Antenna or Cable depending on which you have attached to your TV.

1 Press MENU.

2 Press or to select “Channel”, then press or OK.

3 Press or to select “TV Mode”, then press or OK.

4 Press or to select “Antenna” or “Cable”, then press OK.

Scan Channels

Auto Scan Channels

TV Mode Cable

Auto Channel Scan

Partial Channel Scan

Find Channel

Channel Management

Digital MTS English

The TV is equipped with a channel memory. When you run auto scan, the TV scans for channels with network signals and memorizes them into memory. It may take 15 to 30 minutes to memorize digital cable channels depending on the reception condition.

1

2

3

Press MENU.

Press or to select “Auto Channel Scan”, then press or OK.

Press or to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scanning, select “Stop Scan” and press OK.

Partial Scan Channels

You can partially scan for network signal within a specified range of channels.

1

2

3

4

Press MENU.

Press or to select “Partial Channel Scan”, then press or OK. Press or to select “Scan Mode”, then press or OK.

Press or to select an option, then press OK

• “Analog/Digital”: scan for both analog and digital channels

5

6

7

•“Analog”: scan for analog channels

•“Digital”: scan for digital channels

Press or to select “From Channel”, then enter a starting channel range.

Press or to select “To Channel”, then enter an ending channel range. Press or to select “Start Scan”, then press OK.

Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.

34